Corrigendum to Commission communication in OJ C 171of 2002-07-17 (Spanish version only) concerning pressure equipment OJ C 244 of 2002-10-10
Corrigendum to the Commission communication in OJ C 227 of 1999-08-10 concerning pressure equipment OJ C 74 of 2001-03-07
Corrigendum to the Commission Communication in OJ C 210 of 2000-07-22 concerning pressure equipment OJ C 270 of 2000-09-21
Commission communication concerning pressure equipment OJ C 210 of 2000-07-22
Commission communication concerning pressure equipment OJ C 227 of 1999-08-10
The information contained in the summary list is a compilation of the references of standards which have been published in the Official Journal of the European Communities. Although the list is updated regularly, it may not be complete and it does not have any legal validity; only publication in the Official Journal produces legal affect
ESO |
Standard reference |
Titles |
Ratifica-
tion date |
Publication in OJ |
CEN |
EN 19 :2002 |
Industrial valves - marking of metallic valves |
|
C 171 of 2002-07-17 |
CEN |
EN 378-1:2000 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria |
|
C 202 of 2001-07-18 |
CEN |
EN 378-2 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation |
2000 |
C 348 of 2000-12-05 |
CEN |
EN 378-3 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection |
2000 |
C 348 of 2000-12-05 |
CEN |
EN 378-4 |
Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery |
2000 |
C 348 of 2000-12-05 |
CEN |
EN 473:2000 |
Non-destructive testing - Qualification and certification of NDT personnel - General principles |
|
C 202 of 2001-07-18 |
CEN |
EN 583-1 |
Non-destructive testing - Ultrasonic examination - Part 1: General principles |
1998 |
C 210 of 2000-07-22 |
CEN |
EN 583-5:2000 |
Non-destructive testing - Ultrasonic examination - Part 5: Characterisation and sizing of discontinuities |
|
C 62 of 2002-03-09 |
CEN |
EN 1092-4:2002 |
Flanges and their joints - circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges |
|
C 171 of 2002-07-17 |
CEN |
EN 1252-1 |
Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below - 80¡ãC |
1998 |
C 348 of 2000-12-05 |
CEN |
EN 1252-2:2001 |
Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between - 80¡ãC and - 20¡ãC |
|
C 62 of 2002-03-09 |
CEN |
EN 1289 |
Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels |
1998 |
C 348 of 2000-12-05 |
CEN |
EN 1291 |
Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels |
1998 |
C 348 of 2000-12-05 |
CEN |
EN 1349:2000/ AC:2001 |
Industrial process control valves |
|
C 62 of 2002-03-09 |
CEN |
EN 1515-2:2001 |
Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated |
|
C 171 of 2002-07-17 |
CEN |
EN 1591-1:2001 |
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method |
|
C 62 of 2002-03-09 |
CEN |
EN 1593 |
Non-destructive testing - Leak testing - Bubble emission techniques |
1999 |
C 210 of 2000-07-22 |
CEN |
EN 1626 |
Cryogenic vessels - Valves for cryogenic service |
1999 |
C 210 of 2000-07-22 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied. |
CEN |
EN 1653 :1997
A1 :2000 |
Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
|
C 202 of 2001-07-18 |
CEN |
EN 1708-1 |
Welding - Basic weld joint details in steel - Part 1: Press-urised components |
1999 |
C 227 of 1999-08-10 |
CEN |
EN 1711:2000 |
Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis |
|
C 202 of 2001-07-18 |
CEN |
EN 1713 |
Non-destructive examination of welds - Ultrasonic examination - Characterization of indications in welds |
1998 |
C 348 of 2000-12-05 |
CEN |
EN 1779 |
Non-destructive testing - Leak testing - Criteria for method and technique selection |
1999 |
C 210 of 2000-07-22 |
CEN |
EN 1797:2001 |
Cryogenic vessels - Gas/material compatibility |
|
C 62 of 2002-03-09 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 1982 |
Copper and copper alloys - Ingots and castings |
1998 |
C 348 of 2000-12-05 |
CEN |
EN 1984 |
Industrial valves - Steel gate valves |
2000 |
C 348 of 2000-12-05 |
CEN |
EN ISO 9606-3 |
Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) |
1999 |
C 210 of 2000-07-22 |
CEN |
EN ISO 9606-4 |
Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) |
1999 |
C 210 of 2000-07-22 |
CEN |
EN ISO 9606-5 |
Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) |
2000 |
C 348 of 2000-12-05 |
CEN |
EN ISO 9692-2 |
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steel (ISO 9692-2:1998) |
1998 |
C 210 of 2000-07-22 |
CEN |
EN ISO 9692-3:2001 |
Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000) |
|
C 62 of 2002-03-09 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10028-1 |
Flat products made of steels for pressure purposes -
Part 1 : General requirements |
2000 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10028-2 |
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
1992 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10028-3 |
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
1992 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10028-4 |
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
1994 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10028-5 |
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled |
1996 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10028-6 |
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered |
1996 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10028-7 |
Flat products made of steels for pressure purposes -
Part 7 : Stainless steels |
2000 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10213-1 |
Technical delivery conditions for steel castings for pressure purposes - Part 1: General |
1995 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10213-2 |
Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures |
1995 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10213-3 |
Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures |
1995 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10213-4 |
Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades |
1995 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10222-1 |
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings |
1998 |
C 348 of 2000-12-05 |
CEN |
EN 10222-1/1998 - A1:2001 |
Steel forging for pressure purposes - Part 1: General requirements for open die forging |
|
C 171 of 2002-07-17 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10222-2 |
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties |
1999 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied." |
CEN |
EN 10222-3 |
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties |
1998 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied. |
CEN |
EN 10222-4 |
Steels forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
1998 |
C 348 of 2000-12-05 |
CEN |
EN 10222-4:1998/ A1:2001 |
Steels forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength |
|
C 71 of 2003-03-25 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied. |
CEN |
EN 10222-5 |
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels |
1999 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied. |
CEN |
EN 10269 |
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
1999 |
C 348 of 2000-12-05 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied. |
CEN |
EN 10272:2000 |
Stainless steel bars for pressure purposes |
|
C 202 of 2001-07-18 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied. |
CEN |
EN 10273:2000 |
Hot rolled weldable steels bars for pressure purposes with specified elevated temperature properties |
|
C 202 of 2001-07-18 |
CEN |
EN 12263 |
Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests |
1998 |
C 210 of 2000-07-22 |
CEN |
EN 12300 |
Cryogenic vessels - Cleanliness for cryogenic service 1998 |
1998 |
C 227 of 1999-08-10 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied. |
CEN |
EN 12334:2001/ AC:2002 |
Industrial valves - Cast iron check valves |
|
C 71 of 2003-03-25 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied. |
CEN |
EN 12392:2000 |
Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment |
|
C 202 of 2001-07-18 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied. |
CEN |
EN 12420 |
Copper and copper alloys - Forgings |
1999 |
C 348 of 2000-12-05 |
CEN |
EN 12434:2000 |
Cryogenic vessels - Cryogenic flexible hoses |
|
C 202 of 2001-07-18 |
For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied. |
CEN |
EN 12451 |
Copper and copper alloys - Seamless, round tubes for heat exchangers |
1999 |
C 348 of 2000-12-05 |
CEN |
EN 12452 |
Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
1999 |
C 210 of 2000-07-22 |
CEN |
EN 12517 |
Non destructive examination of welds - Radiographic examination of welded joints - Acceptance levels |
1998 |
C 227 of 1999-08-10 |
CEN |
EN 12542:2002 |
Static welded steel cylindrical tanks, serially produced for the storage of LPG having a volume not greater than 13 m3 and for installation above ground - design and manufacture |
|
C 171 of 2002-07-17 |
CEN |
EN ISO 12797:2000 |
Brazing - Destructive tests of brazed joints |
|
C 62 of 2002-03-09 |
CEN |
EN 12952-1:2001 |
Water-tub boilers and auxiliary installations - Part 1: General |
|
C 171 of 2002-07-17 |
CEN |
EN 12952-2:2001 |
Water-tub boilers and auxiliary installations - Part 2: materials for pressure parts of boilers and accessories |
|
C 171 of 2002-07-17 |
CEN |
EN 12952-3:2001 |
Water-tub boilers and auxiliary installations - Part 3: Design and calculation for pressure parts |
|
C 171 of 2002-07-17 |
CEN |
EN 12952-5:2001 |
Water-tub boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
|
C 171 of 2002-07-17 |
CEN |
EN 12952-6:2002 |
Water-tub boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler |
|
C 171 of 2002-07-17 |
CEN |
EN 12952-7:2002 |
Water-tub boilers and auxiliary installations - Part 7: requirements for equipment for the boiler |
|
C 171 of 2002-07-17 |
CEN |
EN 12952-8:2002 |
Water-tub boilers and auxiliary installations - Part 8: requirements for firing systems for liquid and gaseous fuels for the boiler |
|
C 171 of 2002-07-17 |
CEN |
EN 12952-10:2002 |
Water-tub boilers and auxiliary installations - Part 10: requirements for safeguards against excessive pressure |
|
C 71 of 2003-03-25 |
CEN |
EN 12953-1:2002 |
Shell boilers - Part 1: General |
|
C 171 of 2002-07-17 |
CEN |
EN 12953-2:2002 |
Shell boilers - Part 2: Materials for pressure parts of boilers and accessories |
|
C 171 of 2002-07-17 |
CEN |
EN 12953-3:2002 |
Shell boilers - Part 3: design and calculation for pressure parts |
|
C 171 of 2002-07-17 |
CEN |
EN 12953-4:2002 |
Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler |
|
C 171 of 2002-07-17 |
CEN |
EN 12953-5:2002 |
Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of boiler |
|
C 171 of 2002-07-17 |
CEN |
EN 12953-6:2002 |
Shell boilers - Part 6: Requirements for equipment of the boiler |
|
C 171 of 2002-07-17 |
CEN |
EN 12953-7:2002 |
Shell boilers - Part 7: Requirement for firing systems for liquid and gaseous fuels for the boiler |
|
C 171 of 2002-07-17 |
CEN |
EN 12953-8:2001 |
Shell boilers - Part 8: Requirements for safeguards against excessive pressure |
|
C 71 of 2003-03-25 |
CEN |
EN 13133:2000 |
Brazing - Brazer approval |
|
C 202 of 2001-07-18 |
CEN |
EN 13134:2000 |
Brazing - Procedure approval |
|
C 202 of 2001-07-18 |
CEN |
EN ISO 13136:2001 |
Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation |
|
C 62 of 2002-03-09 |
CEN |
EN 13371:2001 |
Cryogenic vessels-couplings for cryogenic service |
|
C 171 of 2002-07-17 |
CEN |
EN 13397:2001 |
Industrial valves - Diaphragm valves made of metallic materials |
|
C 171 of 2002-07-17 |
CEN |
EN 13445-1:2002 |
Unfired pressure vessels - Part 1: General |
|
C 171 of 2002-07-17 |
CEN |
EN 13445-2:2002 |
Unfired pressure vessels - Part 2: Materials |
|
C 171 of 2002-07-17 |
CEN |
EN 13445-3:2002 |
Unfired pressure vessels - Part 3: Design |
|
C 171 of 2002-07-17 |
CEN |
EN 13445-4: 2002 |
Unfired pressure vessels - Part 4: Manufacture |
|
C 171 of 2002-07-17 |
CEN |
EN 13445-5:2002 |
Unfired pressure vessels - Part 5: Inspection and testing |
|
C 171 of 2002-07-17 |
CEN |
EN 13445-6:2002 |
Unfired pressure vessels - Part 6: Requirements for design and fabrication of pressure vessels parts constructed of spheridal graphite cast iron; compliance and inspection of materials |
|
C 171 of 2002-07-17 |
CEN |
EN 13458-1:2002 |
Cryogenic vessels-Static vacuum insulated vessels - Part 1: Fundamental requirements |
|
C 171 of 2002-07-17 |
CEN |
EN 13480-1:2002 |
Metallic industrial piping - Part 1: General |
|
C 171 of 2002-07-17 |
CEN |
EN 13480-2:2002 |
Metallic industrial piping - Part 2: Materials |
|
C 171 of 2002-07-17 |
CEN |
EN 13480-3:2002 |
Metallic industrial piping - Part 3: Design and calculation |
|
C 171 of 2002-07-17 |
CEN |
EN 13480-4:2002 |
Metallic industrial piping - Part 4: fabrication and installation |
|
C 171 of 2002-07-17 |
CEN |
EN 13480-5:2002 |
Metallic industrial piping ¨C Part 5: Inspection and testing |
|
C 171 of 2002-07-17 |
CEN |
EN 13648-1:2002 |
Cryogenic vessels-Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic vessels |
|
C 171 of 2002-07-17 |
CEN |
EN 13648-2:2002 |
Cryogenic vessels-Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service |
|
C 171 of 2002-07-17 |
CEN |
EN 13789:2002 |
Industrial valves - Cast iron globe valves |
|
C 71 of 2003-03-25 |
CEN |
EN ISO 15614-8:2002 |
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002) |
|
C 71 of 2003-03-25 |
CEN |
EN ISO 15614-11:2002 |
Specification and approval of welding procedures for metallic materials - Welding procedures test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) |
|
C 71 of 2003-03-25 |
CEN |
EN ISO 15620:2000 |
Welding - Friction welding of metallic materials (ISO 15620:2000) |
|
C 71 of 2003-03-25 |