Home Page About Us Contact Us Downloads Cooperation FAQ  
Test ability
Testing Service
Certificate Inquire
Knowledge
Standards & Directive

 

Directive 97/23/EC

Pressure Equipment

Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
(OJ No L 181 of 1997-07-09)

Publications in the Official Journal:

Commission communication concerning pressure equipment OJ C 71 of 2003-03-25

Corrigendum to Commission communication in OJ C 171of 2002-07-17 (Spanish version only) concerning pressure equipment OJ C 244 of 2002-10-10

Commission communication concerning pressure equipment OJ C 171 of 2002-07-17

Commission communication concerning pressure equipment OJ C 62 of 2002-03-09

Commission communication concerning pressure equipment OJ C 202 of 2001-07-18

Corrigendum to the Commission communication in OJ C 227 of 1999-08-10 concerning pressure equipment OJ C 74 of 2001-03-07

Commission communication concerning pressure equipment OJ C 362 of 2000-12-16

Corrigendum to the Commission Communication in OJ C 210 of 2000-07-22 concerning pressure equipment OJ C 270 of 2000-09-21

Commission communication concerning pressure equipment OJ C 210 of 2000-07-22

Commission communication concerning pressure equipment OJ C 227 of 1999-08-10

Summary list of titles and references to harmonised standards in relation to pressure equipment

The information contained in the summary list is a compilation of the references of standards which have been published in the Official Journal of the European Communities. Although the list is updated regularly, it may not be complete and it does not have any legal validity; only publication in the Official Journal produces legal affect

ESO

Standard reference

Titles

Ratifica-
tion date

Publication in OJ

CEN

EN 19 :2002

Industrial valves - marking of metallic valves

C 171 of 2002-07-17

CEN

EN 378-1:2000

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria

C 202 of 2001-07-18

CEN

EN 378-2

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation

2000

C 348 of 2000-12-05

CEN

EN 378-3

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 3: Installation site and personal protection

2000

C 348 of 2000-12-05

CEN

EN 378-4

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery

2000

C 348 of 2000-12-05

CEN

EN 473:2000

Non-destructive testing - Qualification and certification of NDT personnel - General principles

C 202 of 2001-07-18

CEN

EN 583-1

Non-destructive testing - Ultrasonic examination - Part 1: General principles

1998

C 210 of 2000-07-22

CEN

EN 583-5:2000

Non-destructive testing - Ultrasonic examination - Part 5: Characterisation and sizing of discontinuities

C 62 of 2002-03-09

CEN

EN 1092-4:2002

Flanges and their joints - circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges

C 171 of 2002-07-17

CEN

EN 1252-1

Cryogenic vessels - Materials - Part 1: Toughness requirements for temperatures below - 80C

1998

C 348 of 2000-12-05

CEN

EN 1252-2:2001

Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between - 80C and - 20C

C 62 of 2002-03-09

CEN

EN 1289

Non-destructive examination of welds - Penetrant testing of welds - Acceptance levels

1998

C 348 of 2000-12-05

CEN

EN 1291

Non-destructive examination of welds - Magnetic particle testing of welds - Acceptance levels

1998

C 348 of 2000-12-05

CEN

EN 1349:2000/ AC:2001

Industrial process control valves

C 62 of 2002-03-09

CEN

EN 1515-2:2001

Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated

C 171 of 2002-07-17

CEN

EN 1591-1:2001

Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method

C 62 of 2002-03-09

CEN

EN 1593

Non-destructive testing - Leak testing - Bubble emission techniques

1999

C 210 of 2000-07-22

CEN

EN 1626

Cryogenic vessels - Valves for cryogenic service

1999

C 210 of 2000-07-22

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied.

CEN

EN 1653 :1997
A1 :2000

Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot water storage units

C 202 of 2001-07-18

CEN

EN 1708-1

Welding - Basic weld joint details in steel - Part 1: Press-urised components

1999

C 227 of 1999-08-10

CEN

EN 1711:2000

Non-destructive examination of welds - Eddy current examination of welds by complex plane analysis

C 202 of 2001-07-18

CEN

EN 1713

Non-destructive examination of welds - Ultrasonic examination - Characterization of indications in welds

1998

C 348 of 2000-12-05

CEN

EN 1779

Non-destructive testing - Leak testing - Criteria for method and technique selection

1999

C 210 of 2000-07-22

CEN

EN 1797:2001

Cryogenic vessels - Gas/material compatibility

C 62 of 2002-03-09

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 1982

Copper and copper alloys - Ingots and castings

1998

C 348 of 2000-12-05

CEN

EN 1984

Industrial valves - Steel gate valves

2000

C 348 of 2000-12-05

CEN

EN ISO 9606-3

Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999)

1999

C 210 of 2000-07-22

CEN

EN ISO 9606-4

Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999)

1999

C 210 of 2000-07-22

CEN

EN ISO 9606-5

Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000)

2000

C 348 of 2000-12-05

CEN

EN ISO 9692-2

Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steel (ISO 9692-2:1998)

1998

C 210 of 2000-07-22

CEN

EN ISO 9692-3:2001

Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2000)

C 62 of 2002-03-09

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10028-1

Flat products made of steels for pressure purposes -
Part 1 : General requirements

2000

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10028-2

Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties

1992

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10028-3

Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized

1992

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10028-4

Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties

1994

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10028-5

Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled

1996

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10028-6

Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered

1996

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10028-7

Flat products made of steels for pressure purposes -
Part 7 : Stainless steels

2000

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10213-1

Technical delivery conditions for steel castings for pressure purposes - Part 1: General

1995

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10213-2

Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures

1995

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10213-3

Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures

1995

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10213-4

Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades

1995

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10222-1

Steel forgings for pressure purposes - Part 1: General requirements for open die forgings

1998

C 348 of 2000-12-05

CEN

EN 10222-1/1998 - A1:2001

Steel forging for pressure purposes - Part 1: General requirements for open die forging

C 171 of 2002-07-17

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10222-2

Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperature properties

1999

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied."

CEN

EN 10222-3

Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties

1998

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied.

CEN

EN 10222-4

Steels forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength

1998

C 348 of 2000-12-05

CEN

EN 10222-4:1998/ A1:2001

Steels forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength

C 71 of 2003-03-25

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied.

CEN

EN 10222-5

Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels

1999

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied.

CEN

EN 10269

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

1999

C 348 of 2000-12-05

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied.

CEN

EN 10272:2000

Stainless steel bars for pressure purposes

C 202 of 2001-07-18

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied.

CEN

EN 10273:2000

Hot rolled weldable steels bars for pressure purposes with specified elevated temperature properties

C 202 of 2001-07-18

CEN

EN 12263

Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests

1998

C 210 of 2000-07-22

CEN

EN 12300

Cryogenic vessels - Cleanliness for cryogenic service 1998

1998

C 227 of 1999-08-10

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied.

CEN

EN 12334:2001/ AC:2002

Industrial valves - Cast iron check valves

C 71 of 2003-03-25

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied.

CEN

EN 12392:2000

Aluminium and aluminium alloys - Wrought products - Special requirements for products intended for the production of pressure equipment

C 202 of 2001-07-18

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied.

CEN

EN 12420

Copper and copper alloys - Forgings

1999

C 348 of 2000-12-05

CEN

EN 12434:2000

Cryogenic vessels - Cryogenic flexible hoses

C 202 of 2001-07-18

For the following harmonised supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific equipment. Consequently the technical data stated in the material standard should be assessed against the design requirements of the specific equipment to verify that the ESRs of the PED are satisfied.

CEN

EN 12451

Copper and copper alloys - Seamless, round tubes for heat exchangers

1999

C 348 of 2000-12-05

CEN

EN 12452

Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers

1999

C 210 of 2000-07-22

CEN

EN 12517

Non destructive examination of welds - Radiographic examination of welded joints - Acceptance levels

1998

C 227 of 1999-08-10

CEN

EN 12542:2002

Static welded steel cylindrical tanks, serially produced for the storage of LPG having a volume not greater than 13 m3 and for installation above ground - design and manufacture

C 171 of 2002-07-17

CEN

EN ISO 12797:2000

Brazing - Destructive tests of brazed joints

C 62 of 2002-03-09

CEN

EN 12952-1:2001

Water-tub boilers and auxiliary installations - Part 1: General

C 171 of 2002-07-17

CEN

EN 12952-2:2001

Water-tub boilers and auxiliary installations - Part 2: materials for pressure parts of boilers and accessories

C 171 of 2002-07-17

CEN

EN 12952-3:2001

Water-tub boilers and auxiliary installations - Part 3: Design and calculation for pressure parts

C 171 of 2002-07-17

CEN

EN 12952-5:2001

Water-tub boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler

C 171 of 2002-07-17

CEN

EN 12952-6:2002

Water-tub boilers and auxiliary installations - Part 6: Inspection during construction, documentation and marking of pressure parts of the boiler

C 171 of 2002-07-17

CEN

EN 12952-7:2002

Water-tub boilers and auxiliary installations - Part 7: requirements for equipment for the boiler

C 171 of 2002-07-17

CEN

EN 12952-8:2002

Water-tub boilers and auxiliary installations - Part 8: requirements for firing systems for liquid and gaseous fuels for the boiler

C 171 of 2002-07-17

CEN

EN 12952-10:2002

Water-tub boilers and auxiliary installations - Part 10: requirements for safeguards against excessive pressure

C 71 of 2003-03-25

CEN

EN 12953-1:2002

Shell boilers - Part 1: General

C 171 of 2002-07-17

CEN

EN 12953-2:2002

Shell boilers - Part 2: Materials for pressure parts of boilers and accessories

C 171 of 2002-07-17

CEN

EN 12953-3:2002

Shell boilers - Part 3: design and calculation for pressure parts

C 171 of 2002-07-17

CEN

EN 12953-4:2002

Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler

C 171 of 2002-07-17

CEN

EN 12953-5:2002

Shell boilers - Part 5: Inspection during construction, documentation and marking of pressure parts of boiler

C 171 of 2002-07-17

CEN

EN 12953-6:2002

Shell boilers - Part 6: Requirements for equipment of the boiler

C 171 of 2002-07-17

CEN

EN 12953-7:2002

Shell boilers - Part 7: Requirement for firing systems for liquid and gaseous fuels for the boiler

C 171 of 2002-07-17

CEN

EN 12953-8:2001

Shell boilers - Part 8: Requirements for safeguards against excessive pressure

C 71 of 2003-03-25

CEN

EN 13133:2000

Brazing - Brazer approval

C 202 of 2001-07-18

CEN

EN 13134:2000

Brazing - Procedure approval

C 202 of 2001-07-18

CEN

EN ISO 13136:2001

Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation

C 62 of 2002-03-09

CEN

EN 13371:2001

Cryogenic vessels-couplings for cryogenic service

C 171 of 2002-07-17

CEN

EN 13397:2001

Industrial valves - Diaphragm valves made of metallic materials

C 171 of 2002-07-17

CEN

EN 13445-1:2002

Unfired pressure vessels - Part 1: General

C 171 of 2002-07-17

CEN

EN 13445-2:2002

Unfired pressure vessels - Part 2: Materials

C 171 of 2002-07-17

CEN

EN 13445-3:2002

Unfired pressure vessels - Part 3: Design

C 171 of 2002-07-17

CEN

EN 13445-4: 2002

Unfired pressure vessels - Part 4: Manufacture

C 171 of 2002-07-17

CEN

EN 13445-5:2002

Unfired pressure vessels - Part 5: Inspection and testing

C 171 of 2002-07-17

CEN

EN 13445-6:2002

Unfired pressure vessels - Part 6: Requirements for design and fabrication of pressure vessels parts constructed of spheridal graphite cast iron; compliance and inspection of materials

C 171 of 2002-07-17

CEN

EN 13458-1:2002

Cryogenic vessels-Static vacuum insulated vessels - Part 1: Fundamental requirements

C 171 of 2002-07-17

CEN

EN 13480-1:2002

Metallic industrial piping - Part 1: General

C 171 of 2002-07-17

CEN

EN 13480-2:2002

Metallic industrial piping - Part 2: Materials

C 171 of 2002-07-17

CEN

EN 13480-3:2002

Metallic industrial piping - Part 3: Design and calculation

C 171 of 2002-07-17

CEN

EN 13480-4:2002

Metallic industrial piping - Part 4: fabrication and installation

C 171 of 2002-07-17

CEN

EN 13480-5:2002

Metallic industrial piping C Part 5: Inspection and testing

C 171 of 2002-07-17

CEN

EN 13648-1:2002

Cryogenic vessels-Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic vessels

C 171 of 2002-07-17

CEN

EN 13648-2:2002

Cryogenic vessels-Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service

C 171 of 2002-07-17

CEN

EN 13789:2002

Industrial valves - Cast iron globe valves

C 71 of 2003-03-25

CEN

EN ISO 15614-8:2002

Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2002)

C 71 of 2003-03-25

CEN

EN ISO 15614-11:2002

Specification and approval of welding procedures for metallic materials - Welding procedures test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)

C 71 of 2003-03-25

CEN

EN ISO 15620:2000

Welding - Friction welding of metallic materials (ISO 15620:2000)

C 71 of 2003-03-25


Copyright 2005-2008 Telab-bv.com Incorporated. All rights reserved