Reference |
Title |
BS 905-2:1991*EN 55020:1988 |
Sound and television broadcast receivers and associated equipment: electromagnetic compatibility. Specification for immunity from radio interference of broadcast receivers and associated equipment |
BS 923-1:1990*IEC 60060-1:1989 |
Guide on high-voltage testing techniques. General |
BS 4727-1:Group 09:1991*IEC 60050-161:1990 |
Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics. Electromagnetic compatibility |
BS 5049-1:1994*CISPR 18-1:1982 |
Radio interference characteristics of overhead power lines and high-voltage equipment. Description of phenomena |
BS 5049-2:1994*CISPR 18-2:1986 |
Radio interference characteristics of overhead power lines and high-voltage equipment. Methods of measurement and procedure for determining limits |
BS 5049-3:1994*CISPR 18-3:1986 |
Radio interference characteristics of overhead power lines and high-voltage equipment. Code of practice for minimizing the generation of radio noise |
BS 5266-1:1999 |
Emergency lighting. Code of practice for the emergency lighting of premises other than cinemas and certain other specified premises used for entertainment |
BS 5685-8:1991 |
Electricity meters. Specification for impulse operated multiple registers for use with induction electricity meters |
BS 5760-13.5:1996*IEC 60605-3-5:1996 |
Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment. Ground mobile equipment. Low degree of simulation |
BS 6259:1997 |
Code of practice for the design, planning, installation, testing and maintenance of sound systems |
BS 6290-2:1999 |
Lead-acid stationary cells and batteries. Specification for the high-performance Plante positive type |
BS 6290-3:1999 |
Lead-acid stationary cells and batteries. Specification for the flat positive plate type |
BS 6902-1:Supplement No. 1:1996*EN 50061/A1:1995 |
Cardiac pacemakers. Specification for implantable cardiac pacemakers. Electromagnetic compatibility |
BS 7027:1990 |
Specification for limits and methods of measurement of the immunity of marine electrical and electronic equipment to conducted and radiated electromagnetic interference |
BS 7083:1996 |
Guide to the accommodation and operating environment for information technology (IT) equipment |
BS 7484:1991*IEC 61000-2-1:1990 |
Guide to electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems |
BS 7594:1993 |
Code of practice for audio-frequency induction-loop systems (AFILS) |
BS 7602:1992*IEC 61085:1992 |
Guide to general considerations for telecommunication services for electrical power systems |
BS 7765:1994 |
Specification for detonators for civil use |
BS G 257-1:1998 |
Design of electromagnetic hazard protection of civil aircraft. Guide to theory and threats |
BS G 257-2:1998 |
Design of electromagnetic hazard protection of civil aircraft. Guide to protection |
BS G 261-1:1996*ISO 5867-1:1996 |
Specification for aircraft. Electromagnetic relays and contactors. General requirements |
BS EN 133100:1998 |
Harmonized system of quality assessment for electronic components. Sectional specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not required |
BS EN 133101:1998 |
Harmonized system of quality assessment for electronic components. Blank detail specification:passive filter units for electromagnetic interference suppression. Filters for which safety tests are not required |
PD ROBT-004:2002 |
EC Directives, functional safety and the role of CENELEC standardization |
PD 6582:1993*CENELEC R110-002:1993 |
Electromagnetic compatibility (EMC). Guide to generic EMC standards |
PD CR R106-001:2002 |
Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields |
PD CR R210-010:2002 |
Electromagnetic compatibility. Emission measurements in fully anechoic chambers |
PD ES 59005:1999 |
Considerations for the evaluation of human exposure to electromagnetic fields (EMFs) from mobile telecommunication equipment (MTE) in the frequency range 30 MHz - 6 GHz |
PD IEC TR 61000-1-3:2002 |
Electromagnetic compatibility (EMC). General. The effects of high-altitude EMP (HEMP) on civil equipment and systems |
PD IEC TR 61000-5-6:2002 |
Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Mitigation of external EM influences |
PD R210-008:2002 |
Guide to EMC conformity of apparatus designed for military and other purposes |
BS EN ISO 8185:1998*BS 5724-2.24:1998 |
Humidifiers for medical use. General requirements for humidification systems |
BS ISO/IEC 10536-1:2000 |
Identification cards. Contactless integrated circuit(s) cards. Close-coupled cards. Physical characteristics |
BS EN ISO 11196:1997 |
Anaesthetic gas monitors |
BS EN ISO 11606:2001 |
Ships and marine technology. Marine electromagnetic compasses |
BS EN ISO 14982:1998 |
Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria |
BS IEC 1000-2-5:1995 |
Electromagnetic compatibility (EMC). Environment. Classification of electromagnetic environments. Basic EMC publication |
BS IEC 1000-2-6:1995 |
Electromagnetic compatibility (EMC). Environment. Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances |
BS IEC 1000-3-5:1994 |
Electromagnetic compatibility (EMC). Limits. Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A |
BS IEC 1000-3-6:1996 |
Electromagnetic compatibility (EMC). Limits. Assessment of emission limits for distorting loads in MV and HV power systems. Basic EMC publication |
BS IEC 1000-3-7:1996 |
Electromagnetic compatibility (EMC). Limits. Assessment of emission limits for fluctuating loads in MV and HV power systems. Basic EMC publication |
BS IEC 1000-5-4:1996 |
Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Immunity to HEMP. Specifications for protective devices against HEMP radiated disturbance. Basic EMC publication |
BS IEC 60533:1999 |
Electrical and electronic installations in ships. Electromagnetic compatibility |
DD IEC TS 61000-1-2:2001 |
Electromagnetic compatibility (EMC). General. Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena |
BS IEC 61000-2-7:1998 |
Electromagnetic compatibility (EMC). Environment. Low frequency magnetic fields in various environments |
BS IEC 61000-3-4:1998 |
Electromagnetic compatibility (EMC). Limits. Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A |
BS IEC 61000-3-8:1997 |
Electromagnetic compatibility (EMC). Limits. Guide to signalling on low-voltage electrical installations. Emission levels, frequency bands and electromagnetic disturbance levels |
BS IEC 61000-5-1:1996 |
Electromagnetic compatibility (EMC). Installation and mitigation guidelines. General considerations. Basic EMC publication |
BS IEC 61000-5-2:1997 |
Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Earthing and cabling |
DD IEC TS 62143:2002 |
Electrical installations for lighting and beaconing of aerodromes. Aeronautical ground lighting systems. Guidelines for the development of a safety lifecycle methodology |
BS EN 617:2001 |
Continuous handling equipment and systems. Safety and EMC requirements for equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
BS EN 618:2002 |
Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
BS EN 619:2002 |
Continuous handling equipment and systems. Safety and EMC requirements for equipment for mechanical handling of unit loads |
BS EN 620:2002 |
Continuous handling equipment and systems. Safety and EMC requirements for fixed belt conveyors for bulk materials |
BS EN 740:1999*BS 5724-2.204:1999 |
Anaesthetic workstations and their modules. Particular requirements |
BS EN 793:1998 |
Particular requirements for safety of medical supply units |
BS EN 794-2:1997*BS 5724-2.203:1997 |
Lung ventilators. Particular requirements for home care use |
BS EN 794-3:1999 |
Lung ventilators. Particular requirements for emergency and transport ventilators |
BS EN 864:1997*BS 5724-2.30:1997 |
Medical electrical equipment. Capnometers for use with humans. Particular requirements |
BS EN 865:1997*BS 5724-2.201:1997 |
Pulse oximeters. Particular requirements |
BS EN 1359:1999 |
Gas meters. Diaphragm gas meters |
BS EN 1760-1:1998 |
Safety of machinery. Pressure sensitive protective devices. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors |
DD ENV 1954:1997 |
Internal and external fault behaviour of safety related electronic parts of gas appliances |
BS EN 12015:1998 |
Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Emission |
BS EN 12016:1998 |
Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Immunity |
BS EN 12182:1999 |
Technical aids for disabled persons. General requirements and test methods |
BS EN 12184:1999 |
Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods |
BS EN 12368:2000 |
Traffic control equipment. Signal heads |
BS EN 12414:1999 |
Vehicle parking control equipment. Pay and display ticket machine. Technical and functional requirements |
BS EN 12523:1999 |
External limb prostheses and external orthoses. Requirements and test methods |
DD ENV 12646:1997 |
Bar coding. Test specifications for bar code scanners and decoders |
DD ENV 12647:1997 |
Bar coding. Test specifications for bar code verifiers |
BS EN 12830:1999 |
Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Tests, performance and suitability |
BS EN 12895:2000 |
Industrial trucks. Electromagnetic compatibility |
BS EN 12919:1999 |
Workplace atmospheres. Pumps for the sampling of chemical agents with a volume flow rate of over 51/min. Requirements and test methods |
BS EN 12957:2001 |
Machine tools. Safety. Electro discharge machines |
BS EN 13309:2000 |
Construction machinery. Electromagnetic compatibility of machines with internal electrical power supply |
BS EN 45502-1:1998 |
Active implantable medical devices. General requirements for safety, marking and information to be provided by the manufacturer |
BS EN 45510-8-1:1998 |
Guide for the procurement of power station equipment. Control and instrumentation |
BS EN 50057:1999 |
Electrical apparatus for the detection and measurement of combustible gases. Performance requirements for Group II apparatus indicating up to 100% lower explosive limit |
BS EN 50081-1:1992 |
Electromagnetic compatibility. Generic emission standard. Residential, commercial and light industry |
BS EN 50081-2:1994 |
Electromagnetic compatibility. Generic emission standard. Industrial environment |
BS EN 50082-1:1992 |
Electromagnetic compatibility. Generic immunity standard. Residential, commercial and light industry |
BS EN 50082-1:1998 |
Electromagnetic compatibility. Generic immunity standard. Residential, commercial and light industry |
BS EN 50083-2:2001 |
Cabled distribution systems for television and sound signals. Electromagnetic compatibility for equipment |
BS EN 50083-8:2002 |
Cabled distribution systems for television and sound signals. Electromagnetic compatibility for networks |
BS EN 50085-1:1999 |
Cable trunking and cable ducting systems for electrical installations. General requirements |
BS EN 50090-2-2:1997 |
Home and Building Electronic Systems (HBES). System overview. General technical requirements |
BS EN 50090-8:2001 |
Home and Building Electronic Systems (HBES). Conformity assessment of products |
BS EN 50091-1:1993 |
Specification for uninterruptible power systems (UPS). General and safety requirements |
BS EN 50091-2:1996 |
Specification for uninterruptible power systems (UPS). EMC requirements |
BS EN 50104:1999 |
Electrical apparatus for the detection and measurement of oxygen. Performance requirements and test methods |
BS EN 50121-1:2000 |
Railway applications. Electromagnetic compatibility. General |
BS EN 50121-2:2000 |
Railway applications. Electromagnetic compatibility. Emission of the whole railway system to the outside world |
BS EN 50121-3-1:2000 |
Railway applications. Electromagnetic compatibility. Rolling stock. Train and complete vehicle |
BS EN 50121-3-2:2000 |
Railway applications. Electromagnetic compatibility. Rolling stock. Apparatus |
BS EN 50121-4:2000 |
Railway applications. Electromagnetic compatibility. Emission and immunity of the signalling and telecommunications apparatus |
BS EN 50121-5:2000 |
Railway applications. Electromagnetic compatibility. Emission and immunity of fixed power supply installations and apparatus |
BS EN 50130-4:1996 |
Alarm systems. Electromagnetic compatibility. Product family standard: Immunity requirements for components of fire, intruder and social alarm systems |
BS EN 50131-1:1997 |
Alarm systems. Intrusion systems. General requirements |
BS EN 50136-2-1:1998 |
Alarm systems. Alarm transmission systems and equipment. General requirements for alarm transmission equipment |
DD ENV 50141:1994 |
Electromagnetic compatibility. Basic immunity standard. Conducted disturbances induced by radio-frequency fields. Immunity test |
DD ENV 50142:1995 |
Electromagnetic compatibility. Basic immunity standard. Surge immunity tests |
BS EN 50147-1:1997 |
Anechoic chambers. Shield attenuation measurement |
BS EN 50147-2:1997 |
Anechoic chambers. Alternative test site suitability with respect to site attenuation |
BS EN 50165:1997 |
Electrical equipment of non-electric appliances for household and similar purposes. Safety requirements |
BS EN 50178:1998 |
Electronic equipment for use in power installations |
BS EN 50199:1996 |
Electromagnetic compatibility (EMC). Product standard for arc welding equipment |
DD ENV 50204:1996 |
Radiated electromagnetic field from digital radio telephones. Immunity test |
BS EN 50215:1999 |
Railway applications. Testing of rolling stock after completion of construction and before entry into service |
BS EN 50227:1999 |
Control circuit devices and switching elements proximity sensors, d.c. interface for proximity sensors and switching amplifiers (NAMUR) |
BS EN 50241-2:1999 |
Specification for open path apparatus for the detection of combustible or toxic gases and vapours. Performance requirements for apparatus for the detection of combustible gases |
BS EN 50263:2000 |
Electromagnetic compatibility (EMC). Product standard for measuring relays and protection equipment |
BS EN 50270:1999 |
Electromagnetic compatibility. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
BS EN 50289-1-6:2002 |
Communication cables. Specifications for test methods. Electrical test methods. Electromagnetic performance |
BS EN 50289-1-11:2002 |
Communication cables. Specifications for test methods. Electrical test methods. Characteristic impedance, input impedance, return loss |
BS EN 50293:2001 |
Electromagnetic compatibility. Road traffic signal systems. Product standard |
BS EN 50295:1999 |
Low-voltage switchgear and controlgear. Controller and device interface systems. Actuator sensor interface (AS-i) |
BS EN 50310:2000 |
Application of equipotential bonding and earthing in buildings with information technology equipment |
BS EN 50319:1999 |
Proximity devices. Requirements for proximity devices with analogue output |
BS EN 50325-1:2001 |
Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. General requirements |
BS EN 50325-3:2001 |
Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces. Smart distributed systems (SDS) |
BS EN 55014-1:1997 |
Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Emission. Product family standard |
BS EN 55014-1:2001 |
Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Emission |
BS EN 55014-2:1997*CISPR 14-2:1997 |
Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus. Immunity. Product family standard |
BS EN 55015:1996*CISPR 15:1996 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment |
BS EN 55020:2002 |
Sound and television broadcast receivers and associated equipment. Immunity characteristics. Limits and methods of measurement |
BS EN 55022:1998*CISPR 22:1997 |
Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement |
BS EN 55024:1998*CISPR 24:1997 |
Information technology equipment. Immunity characteristics. Limits and methods of measurement |
BS EN 55103-1:1997 |
Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Emission |
BS EN 55103-2:1997 |
Electromagnetic compatibility. Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use. Immunity |
BS EN 60034-1:1998 |
Rotating electrical machines. Rating and performance |
BS EN 60118-13:1998*IEC 60118-13:1997 |
Hearing aids. Electromagnetic compatibility (EMC). Product standard |
BS EN 60204-1:1993 |
Safety of machinery. Electrical equipment of machines. Specification for general requirements |
BS EN 60204-31:1998 |
Safety of machinery. Electrical equipment of machines. Particular safety and EMC requirements for sewing machines, units and systems |
BS EN 60255-22-6:2001 |
Electrical relays. Electrical disturbance tests for measuring relays and protection equipment. Immunity to conducted disturbances induced by radio frequency fields |
BS EN 60255-25:2000*IEC 60255-25:2000 |
Electrical relays. Electromagnetic emission tests for measuring relays and protection equipment |
BS EN 60309-1:1999*IEC 60309-1:1999 |
Plugs, socket-outlets and couplers for industrial purposes. General requirements |
BS EN 60315-7:1996*BS 4054-7:1996*IEC 60315-7:1995 |
Methods of measurement on radio receivers for various classes of emission. Methods of measurement on digital satellite radio (DSR) receivers |
BS EN 60320-2-2:1999 |
Appliance couplers for household and similar general purposes. Specification of requirements for individual types of coupler. Interconnection couplers for household and similar equipment |
BS EN 60398:1999*IEC 60398:1999 |
Industrial electroheating installations. General test methods |
BS EN 60439-1:1999*IEC 60439-1:1999 |
Specification for low-voltage switchgear and controlgear assemblies. Type-tested and partially type-tested assemblies |
BS EN 60495:1994*IEC 60495:1993 |
Single sideband power-line carrier terminals |
BS EN 60601-1-2:2002*IEC 60601-1-2:2002 |
Medical electrical equipment. General requirements for safety. Collateral standard. Electromagnetic compatibility. Requirements and tests |
BS EN 60601-2-7:1998*BS 5724-2.7:1998*IEC 60601-2-7:1998 |
Medical electrical equipment. Particular requirements for safety. Specification for high voltage generators of diagnostic X-ray generators |
BS EN 60601-2-18:1997*BS 5724-2.18:1997*IEC 60601-2-18:1996 |
Medical electrical equipment. Particular requirements for safety. Specification for endoscopic equipment |
BS EN 60601-2-19:1997*BS 5724-2.119:1997*IEC 60601-2-19:1990 |
Medical electrical equipment. Particular requirements for safety. Specification for baby incubators |
BS EN 60601-2-24:1998*BS 5724-2.124:1998*IEC 60601-2-24:1998 |
Medical electrical equipment. Particular requirements for safety. Particular requirements for the safety of infusion pumps and controllers |
BS EN 60601-2-35:1997*BS 5724-2.35:1997*IEC 60601-2-35:1996 |
Medical electrical equipment. Particular requirements for safety. Specification for blankets, pads and mattresses intended for heating in medical use |
BS EN 60601-2-36:1997*IEC 60601-2-36:1997*BS 5724-2.36:1997 |
Medical electrical equipment. Particular requirements for safety. Specification for equipment for extra-corporeally induced lithotripsy |
BS EN 60601-2-40:1998*IEC 60601-2-40:1998*BS 5724-2.40:1998 |
Medical electrical equipment. Particular requirements for safety. Specification for electromyographs and evoked response equipment |
BS EN 60601-2-46:1998*IEC 60601-2-46:1998*BS 5724-2.46:1998 |
Medical electrical equipment. Particular requirements for safety. Specification for operating tables |
BS EN 60669-1:2000*BS 3676-1:2000 |
Switches for household and similar fixed electrical installations. General requirements |
BS EN 60669-2-2:1998*IEC 60669-2-2:1996 |
Switches for household and similar fixed electrical installations. Particular requirements. Remote-control switches (RCS) |
BS EN 60687:1993*IEC 60687:1992 |
Specification for alternating current static watt-hour meters for active energy (classes 0,2 S and 0,5 S) |
BS EN 60799:1998*IEC 60799:1998 |
Electrical accessories. Cord sets and interconnection cord sets |
BS EN 60801-2:1993*IEC 60801-2:1991 |
Electromagnetic compatibility for industrial-process measurement and control equipment. Electrostatic discharge requirements |
BS EN 60831-1:1998*IEC 60831-1:1996 |
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V. General. Performance, testing and rating. Safety requirements. Guide for installation and operation |
BS EN 60868:1993 |
Flickermeter. Functional and design specifications |
BS EN 60870-2-1:1996*IEC 60870-2-1:1995 |
Telecontrol equipment and systems. Operating conditions. Power supply and electromagnetic compatibility |
BS EN 60931-1:1998*IEC 60931-1:1996 |
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V. General. Performance, testing and rating. Safety requirements. Guide for installation and operation |
BS EN 60945:1997*IEC 60945:1996 |
Maritime navigation and radiocommunication equipment and systems. General requirements. Methods of testing and required test results |
BS EN 60947-3:1999 |
Specification for low-voltage switchgear and controlgear. Switches, disconnectors, switch-disconnectors and fuse-combination units |
BS EN 60947-5-1:1998 |
Specification for low-voltage switchgear and controlgear. Control circuit devices and switching elements. Electromechanical control circuit devices |
BS EN 61000-2-2:2002 |
Electromagnetic compatibility (EMC). Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
BS EN 61000-2-4:2002 |
Electromagnetic compatibility (EMC). Environment. Compatibility levels in industrial plants for low-frequency conducted disturbances |
BS EN 61000-2-9:1996*IEC 61000-2-9:1996 |
Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Radiated disturbance. Basic EMC publication |
BS EN 61000-2-10:1999*IEC 61000-2-10:1998 |
Electromagnetic compatibility (EMC). Environment. Description of HEMP environment. Conducted disturbance |
BS EN 61000-3-2:2001*IEC 61000-3-2:2000 |
Electromagnetic compatibility (EMC). Limits. Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) |
BS EN 61000-3-3:1995*IEC 61000-3-3:1994 |
Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <LE> 16 A per phase and not subject to conditional connection |
BS EN 61000-3-11:2001*IEC 61000-3-11:2000 |
Electromagnetic compatibility (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current <LE> 75 A and subject to conditional connection |
BS EN 61000-4-1:1995*IEC 61000-4-1:1992 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of immunity tests. Basic EMC publication |
BS EN 61000-4-1:2001*IEC 61000-4-1:2000 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Overview of IEC 61000-4 series |
BS EN 61000-4-2:1995*IEC 61000-4-2:1995 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrostatic discharge immunity test. Basic EMC publication |
BS EN 61000-4-3:2002 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radio-frequency, electromagnetic field immunity test |
BS EN 61000-4-4:1995*IEC 61000-4-4:1995 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test. Basic EMC publication |
BS EN 61000-4-5:1995*IEC 61000-4-5:1995 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Surge immunity test |
BS EN 61000-4-6:1996*IEC 61000-4-6:1996 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields |
BS EN 61000-4-7:1993*IEC 61000-4-7:1991 |
Electromagnetic compatibility (EMC). General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
BS EN 61000-4-8:1994*IEC 61000-4-8:1993 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Power frequency magnetic field immunity test. Basic EMC publication |
BS EN 61000-4-9:1994*IEC 61000-4-9:1993 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Pulse magnetic field immunity test. Basic EMC publication |
BS EN 61000-4-10:1994*IEC 61000-4-10:1993 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory magnetic field immunity test. Basic EMC publication |
BS EN 61000-4-11:1994 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage dips, short interruptions and voltage variations immunity tests |
BS EN 61000-4-12:1996*IEC 61000-4-12:1995 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Oscillatory waves immunity test. Basic EMC publication |
BS EN 61000-4-13:2002*IEC 61000-4-13:2002 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
BS EN 61000-4-14:1999*IEC 61000-4-14:1999 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Voltage fluctuation immunity test |
BS EN 61000-4-15:1998*IEC 61000-4-15:1997 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Flickermeter. Functional and design specifications. Basic EMC publication |
BS EN 61000-4-16:1998*IEC 61000-4-16:1998 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
BS EN 61000-4-17:1999*IEC 61000-4-17:1999 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Ripple on d.c. input power port immunity test |
BS EN 61000-4-23:2001*IEC 61000-4-23:2000 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP and other radiated disturbances |
BS EN 61000-4-24:1997*IEC 61000-4-24:1997 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Test methods for protective devices for HEMP conducted disturbance. Basic EMC publication |
BS EN 61000-4-25:2002*IEC 61000-4-25:2001 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. HEMP immunity test methods for equipment and systems |
BS EN 61000-4-27:2001*IEC 61000-4-27:2000 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Unbalance, immunity test |
BS EN 61000-4-28:2000*IEC 61000-4-28:1999 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Variation of power frequency, immunity test |
BS EN 61000-4-29:2001*IEC 61000-4-29:2000 |
Electromagnetic compatibility (EMC). Testing and measurement techniques. Testing and measurement techniques. Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
BS EN 61000-5-5:1996*IEC 61000-5-5:1996 |
Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Specification of protective devices for HEMP conducted disturbance. Basic EMC publication |
BS EN 61000-5-7:2001 |
Electromagnetic compatibility (EMC). Installation and mitigation guidelines. Installation and mitigation guidelines. Degrees of protection by enclosures against electromagnetic disturbances (EM code) |
BS EN 61000-6-1:2001 |
Electromagnetic compatibility (EMC). Generic standards. Immunity for residential, commercial and light-industrial environments |
BS EN 61000-6-2:1999*IEC 61000-6-2:1999 |
Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments |
BS EN 61000-6-2:2001 |
Electromagnetic compatibility (EMC). Generic standards. Immunity standard for industrial environments |
BS EN 61000-6-3:2001 |
Electromagnetic compatibility (EMC). Generic standards. Emission standard for residential, commercial and light-industrial environments |
BS EN 61000-6-4:2001 |
Electromagnetic compatibility (EMC). Generic standards. Emission standard for industrial environments |
BS EN 61076-4-103:1999*IEC 61076-4-103:1999 |
Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors. Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm |
BS EN 61204-3:2001*IEC 61204-3:2000 |
Low voltage power supplies, d.c. output. Electromagnetic compatibility (EMC) |
BS EN 61242:1998 |
Electrical accessories. Cable reels for household and similar purposes |
BS EN 61268:1996*IEC 61268:1995 |
Alternating current static var-hour meters for reactive energy (classes 2 and 3) |
BS EN 61316:2000*IEC 61316:1999 |
Industrial cable reels |
BS EN 61326:1998*IEC 61326-1:1997 |
Electrical equipment for measurement, control and laboratory use. EMC requirements |
BS EN 61362:1998 |
Guide to specification of hydroturbine control systems |
BS EN 61400-2:1996*IEC 61400-2:1996 |
Wind turbine generator systems. Safety of small wind turbines |
BS EN 61496-1:1998*IEC 61496-1:1997 |
Safety of machinery. Electro-sensitive protective equipment. General requirements and tests |
BS EN 61543:1996 |
Residual current-operated protective devices (RCDs) for household and similar use. Electromagnetic compatibility |
BS EN 61547:1996*IEC 61547:1995 |
Specification for equipment for general lighting purposes. EMC immunity requirements |
BS EN 61557-1:1997*IEC 61557-1:1997 |
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. Equipment for testing, measuring or monitoring of protective measures. General requirements |
BS EN 61800-3:1997 |
Adjustable speed electrical power drive systems. EMC product standard including specific test methods |
BS EN 61812-1:1997*IEC 61812-1:1996 |
Specified time relays for industrial use. Requirements and tests |
BS EN 61851-21:2002 |
Electric vehicle conductive charging system. Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
BS EN 62053-31:1999*IEC 62053-31:1998 |
Electricity metering equipment (a.c.). Particular requirements. Pulse output devices for electromechanical and electronic meters (two wires only) |
BS CISPR 16-1:1999*CISPR 16-1:1999 |
Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus |
BS CISPR 16-2:1996*CISPR 16-2:1996 |
Specification for radio disturbance and immunity measuring apparatus and methods. Methods of measurement of disturbances and immunity |
BS CISPR 16-3:2000 |
Specification for radio disturbance and immunity measuring apparatus and methods. Reports and recommendations of CISPR |
BS CISPR 16-4:2002 |
Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainty in EMC measurements |
DISC PD 1001:1996 |
A guide to electromagnetic compatibility and structured cabling |
TH 42056 |
CE Marking for Electromagnetic Compatibility. A guide to the EMC Directive |
TH 42071 |
EMC for IT and Related Equipment in the USA. A guide to the requirements for digital devices |
88/33378 DC |
Amendment No. 3 to BS 6513. Wideband cabled distribution systems. Part 2. Methods of measurement |
91/22443 DC |
Electromagnetic compatibility (EMC) for secondary systems in gas-insulated metal-enclosed switchgear for rated voltages of 72.5 kV and above [17C(Secretariat)102] |
92/20257 DC |
IEC 1000-2-XXXX. Environment. Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems [77(Sec)113] |
92/29256 DC |
Characterization and classification of the asymmetrical disturbance source induced in telephone-subscriber lines by AM broadcasting transmitters in the LW, MW and SW bands [CISPR/A(SEC)128] |
92/33163 DC |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148.5 kHz. Part 2. Immunity from interference [CLC 105(Secretariat)66] |
92/78601 DC |
Aerospace series. Static inverters for aircraft. General standard (prEN 3700) |
93/705955 DC |
Road vehicles. Electrical disturbances by narrow band radiated electromagnetic energy. Component test methods. Part 1. General and definitions. Part 2. Absorber lined chamber. Part 3. Transverse electromagnetic mode (TEM) cell. Part 4. Bulk current injection |
93/711458 DC |
[IEC/45B(Secretariat)120] Direct reading personal dose equivalent and/or dose equivalent rate monitors for X, gamma, high energy beta and neutron radiations |
94/202677 DC |
IEC 654-5. Operating conditions for industrial-process measurement and control. Part 5. Electromagnetic compatibility [65A(Secretariat)155] (possible new British Standard BS EN 60654-5) |
94/203050 DC |
International standard IEC 1000-4-Y. Electromagnetic compatibility (EMC). Part 4. Testing and measuring techniques. Section Y. RF emissions from digital radio telephones immunity test. Basic EMC publication [77B(Sec)136] (possible new British Standard) |
94/206372 DC |
Amendment to International Standard. Additional terms to IEV Chapter 161, Publication 50(161) (1990)(08). Electromagnetic compatibility (1/77/CISPR(IEV 161)(Sec)1451/157/1066) (possible amendment to BS 4727:Part 1:Group 09) |
94/507475 DC |
BS ISO 12016. Passenger cars. Alarm systems (ISO/DIS 12016) |
94/705161 DC |
Road vehicles. Electrical disturbances by narrow-band radiated electromagnetic energy. Component test methods. Part 6. Parallel plate antenna (ISO/DIS 11452-6) |
95/200129 DC |
prEN 50220. Generic standard for hearing aids |
95/204625 DC |
Draft Amendment to International Standard IEC 50 (International Electrotechnical Vocabulary) Chapter 161:Electromagnetic compatibility:1990 (1/1534/CD) |
95/206188 DC |
IEC 1326-20. EMC requirements for electrical equipment for measurement, control and laboratory use. Part 20. Particular requirements for equipment used in laboratories or test and measurement areas with a restricted electromagnetic environment (65A/176/C |
95/206189 DC |
IEC 1326-30. EMC requirements for electrical equipment for measurement, control and laboratory use. Part 30. Particular requirements for portable test and measurement equipment that is powered by battery or from the measured circuit (65A/177/CD) |
95/207614 DC |
prEN 50217. EMC. Standard for in-situ emission measurements |
95/208221 DC |
Radio interference from electric traction systems. CISPR/C/77/CD |
95/208740 DC |
IEC 1000-4-20 Electromagnetic compatibility (EMC). Part 4.Testing and measurement techniques. Section 20.TEM cells (77B/153/CD) |
95/209012 DC |
IEC 1000-4-4. Electromagnetic compatibility (EMC). Part 4. Testing and measurement techniques. Section 4. Electrical fast/transient burst immunity test (77B/154/CD) |
95/210789 DC |
IEC 1000-5-6. Electromagnetic compatibility (EMC). Part 5. Mitigation methods and installation guidelines. Section 6. Mitigation of external influences. Technical report type II (77B/157/CD) |
95/212958 DC |
prEN 50226. Electromagnetic compatibility of rechargeable cells or batteries |
95/215048 DC |
Technical report CISPR XY. Predictability of radiation in vertical direction. Part 1. Frequencies above 30 MHz. Technical report type 3 (CISPR/A/166/CD) |
96/105749 DC |
Earth-moving machinery. Electromagnetic compatibility |
96/201399 DC |
prEN 60255-1-00. All-or-nothing electrical relays (IEC 255-1-00:1975, modified) |
96/208116 DC |
prEN 50236. Electromagnetic compatibility for power transformers |
96/210384 DC |
Application guide to the European Standard EN 50160 on "Voltage characteristics of electricity supplied by public distribution systems" (CLC/BTTF 68-6(Sec)7 |
96/210385 DC |
Measurement guide for voltage characteristics (CLC/BTTF 68-6 (SEC)8) |
96/210905 DC |
Technical Report Type 3. Introduction to EMC screening measurements of cables, cable assemblies and connectors. (46A/267/CDV) |
96/211109 DC |
Limits relating to the influence of electric power supply and traction systems on telecommunications systems (CLC/TC 210(SEC)24) |
96/211110 DC |
Basic standard for the calculation and measurement methods relating to the influence of electric power supply and traction systems on telecommunication systems (CLC/TC 210(SEC)23) |
96/215334 DC |
Amendment 1 to IEC 1540. Requirements for electromagnetic compatibility of PRCDs (IEC 23E/276/CD) |
96/215335 DC |
Amendment 1 to IEC 1543. Electromagnetic compatibility of RCDs (IEC 23E/277/CD) |
96/216040 DC |
HEMP protection concepts. IEC/77C/39/CD |
96/562496 DC |
BS 5724.Part 1.Section 1.2. Medical electrical equipment. Part 1. General requirements for safety. 2. Collateral standard. Electromagnetic compatibility. Requirements and tests |
97/200727 DC |
Recommendations for shielded enclosures. Selection of shielding materials, components and filters (CLC/TC 210(SEC)33/34) |
97/200728 DC |
EMC conformity of equipment designed for military and other purposes (CLC/TC210(SEC)35/36) |
97/200935 DC |
IEC 364. Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Revision of Chapter 54. Earthing arrangements and protective conductors (IEC 64/913/CD) |
97/202102 DC |
IEC 1000-2-11. Electromagnetic compatibility (EMC). Part 2. Environment. Section 11. Classification of HEMP environment. 77C/141/CD |
97/206256 DC |
IEC 297-5. Dimensions of mechanical structures of the 482.6 mm (19 inch) series. Part 5. Subracks and associated plug-in for EMC, ESD injector/extractor. Keying etc. for IEC 603-2 connectors (IEC document 48D/119/CD) |
97/207175 DC |
IEC 61921. Low-voltage automatic power factor correction banks (IEC Document 33/269/CD) |
97/209093 DC |
IEC 62040/ED.1. Uninterruptible compatibility (EMC) requirements (IEC Document 22B/107/CD) |
97/210493 DC |
IEC 62041. First edition. Small power transformers, power supply units and similar devices. EMC requirements (IEC Document 96/105/CD) |
97/230888 DC |
IEC 61820. Electrical installation for lighting and beaconing of aerodromes. Constant current series circuits for aeronautical ground lighting (IEC document 97/30/CD) |
97/260450 DC |
IEC 61000-4-7. Electromagnetic compatibility (EMC). Part 4. Testing and measurement techniques. Section 7. General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (IEC/77A/1 |
97/260469 DC |
IEC 61000-3-9. Electromagnetic compatibility (EMC). Part 3-9. Limits for interharmonic current emissions (equipment with input power <LE>16 A per phase and prone to produce interharmonics by design) IEC/77A/196/CD |
97/260470 DC |
IEC 61000-4-31. Electromagnetic compatibility (EMC). Part 4. Testing and measurement techniques. Section 31. Measurements in the frequency range 2 kHz to 9 kHz. Basic EMC standard (IEC 77A/198/CD) |
97/261916 DC |
IEV Chapter 445. Specified time all-or-nothing relays (IEC/1/1684/CD) |
97/706849 DC |
Nuclear power plants. Instrumentation. Methods and criteria for electromagnetic interference testing (IEC 61503, Ed 1) |
97/720195 DC |
Aerospace series. Design of electromagnetic hazard protection of civil aircraft. Part 3. Guide to clearance and testing (BS G 257:Part 3) |
98/103952 DC |
BS EN 12209-3. Building hardware. Locks and latches. Part 3. Electromechanically operated locks and striking plates. Requirements and test methods (prEN 12209-3:1998) |
98/230449 DC |
prEN 133200:1998. Sectional specification. Passive filter units for electromagnetic interference suppression (filters for which safety tests are required) |
98/230450 DC |
prEN 133201:1998. Blank detail specification. Passive filter units for electromagnetic interference suppression. Filters for which safety tests are required |
98/230451 DC |
prEN 133221:1998. Blank detail specification. Passive filter units for electromagnetic interference suppression. Filters for which safety tests are required |
98/232755 DC |
IEC 61936-1. Power installations exceeding 1 kV a.c. Part 1. Common rules (IEC document 99/35/CD) |
98/262449 DC |
IEC 61131-2. Ed.2. Programmable controllers. Part 2. Equipment requirements and tests (IEC/65B/350/CD |
98/263857 DC |
CISPR 21. Ed. 2. Interference to mobile radiocommunications in the presence of impulsive noise. Methods of judging degradation and measures to improve performance (IEC/CISPR/D/210/CDV) |
98/706158 DC |
Automatic gas burner control systems for gas burners and gas burning appliances with or without fans |
98/717438 DC |
Road vehicles. Vehicle test methods for electrical disturbances by narrowband radiated electromagnetic energy. Part 1. General and definitions |
98/717439 DC |
Road vehicles. Component test methods for electrical disturbances by narrowband radiated electromagnetic energy. Part 1. General and definitions |
98/717440 DC |
Road vehicles. Component test methods for electrical disturbances by narrowband radiated electromagnetic energy. Part 3. Transverse electromagnetic mode (TEM) cell |
98/717441 DC |
Road vehicles. Component test methods for electrical disturbances by narrowband radiated electromagnetic energy. Part 4. Bulk current injection (BCI) |
99/201076 DC |
EN 61800-3 prA.1.1. Adjustable speed electrical power drive systems. Part 3. EMC product standard including specific test methods (CENELEC document CLC/TC 22X(secretariat)40) |
99/202534 DC |
prEN 50323. General requirements for hearing aids |
99/202943 DC |
IEC 60728-12. Ed. 1. Cable distribution systems for television and sound signals. Part 12. Electromagnetic compatibility of systems (IEC document 100D/64/CDV) |
99/203890 DC |
BS EN 50065-2-1. Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 2-1. Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and in residential, commercial and light industrial environments |
99/240907 DC |
BS EN 50314-2. Photovoltaic systems. Charge regulators. Part 2. EMC. Test requirements and procedures |
99/240936 DC |
BS EN 50316-2. Photovoltaic lighting systems. Part 2. EMC. Test requirements and procedures |
99/240937 DC |
BS EN 50316-3. Photovoltaic lighting systems. Part 3. Performance. Test requirements and procedures |
99/240938 DC |
BS EN 50322-1. Photovoltaic systems. Part 1. Electromagnetic compatibility (EMC). Requirements for photovoltaic pumping systems |
99/240940 DC |
BS EN 50331-1. Photovoltaic systems in buildings. Part 1. Safety requirements |
99/241076 DC |
IEC 61000-4-21. Electromagnetic compatibility (EMC). Part 4-21. Testing and measurement techniques. Reverberation chambers |
99/241380 DC |
IEC 61000-6-5. Electromagnetic compatibility (EMC). Part 6-5. Generic standards. Immunity for power station and substation environments (IEC document 77/215/CD) |
99/243697 DC |
Electromagnetic compatibility (EMC). Part 4-13. Testing and measurement techniques. Harmonics and interharmonics, including mains signalling at a.c. power port, low frequency immunity tests. Basic EMC publication (IEC document 77A/291/CD) |
99/245066 DC |
IEC 61000-4-30. Electromagnetic compatibility (EMC). Part 4-30. Testing and measurement techniques. Power quality measurement methods (IEC Document 77A/301/CD) |
99/563276 DC |
ISO 7176-21. Wheelchairs. Part 21. Requirements and test methods for electromagnetic compatibility of electronically powered wheelchairs and motorized scooters |
99/712285 DC |
prEN 13646. Building control systems. Equipment characteristics |
99/712286 DC |
prEN ISO 16484-1. Building control systems. Part 1. Overview and definitions (ISO/DIS 16484-1:1999) |
99/716810 DC |
ISO CD 14302. Space systems. Electromagnetic compatibility requirements |
00/203618 DC |
IEC 60255-26. Measuring relays and protection equipment. Part 26. Electromagnetic compatibility requirements for measuring relays and protection equipment (IEC Document 95/99/CD) |
00/203722 DC |
IEC 60118-13. Ed.2. Hearing aids. Part 13: Electromagnetic compatibility (EMC). Product standard |
00/241586 DC |
Electromagnetic compatibility (EMC). Part 3-2. Limits. Limits for harmonic current emissions (equipment input current up to and including 16A per phase) |
00/244020 DC |
IEC 61800-3 Ed. 2. Adjustable speed electrical power drive systems. Part 3: EMC requirements product standard including specific test methods |
00/244985 DC |
IEC 61000-3-12. Electromagnetic compatibility (EMC). Part 3-12. Limits for harmonic currents produced by equipment connected to public low voltage systems with input current <LE> 75 A per phase and subject to restricted connection [IEC Document 77A/325/C |
00/246907 DC |
BS EN 61980-1. Electrical. Electric vehicle inductive charging systems. Part 1: General requirements (IEC Document 69/125/CD) |
00/645282 DC |
EN 50090-9-1. Home and Building Electronic Systems ( HBES). Part 9-1. Installation requirements. Generic cabling for HBES class 1 twisted pair |
00/705404 DC |
IEC 60474-10. Arc welding equipment. Part 10. EMC requirements |
00/709272 DC |
ISO/DIS 7637-1. Road vehicles. Electrical interference by conduction and coupling. Part 1. Definitions and general considerations |
00/709873 DC |
ISO/DIS 11452-5. Road vehicles. Component test methods for electrical disturbances by narrowband radiated electromagnetic energy. Part 5. Stripline |
00/712056 DC |
ISO/DIS 10605. Road vehicles. Test methods for electrical disturbances from electrostatic discharge |
01/200383 DC |
IEC 61000-4-6. Ed.2. Electromagnetic compatibility (EMC). Part 4-6: Testing and measurement techniques. Immunity to conducted disturbances, induced by radio-frequency fields |
01/200798 DC |
IEC 61000-4-2. Ed.2. Electromagnetic compatibility (EMC). Part 4-2: Testing and measurement techniques. Electrostatic discharge immunity test |
01/201291 DC |
prEN 50370-2. Electromagnetic compatibility (EMC). Product family standard for machine tools. Part 2: Immunity |
01/204134 DC |
IEC 62132-1. Ed.1. Integrated circuits. Measurement of electromagnetic immunity, 150 kHz to 1 GHz. Part 1: General and definitions |
01/204271 DC |
IEC 61000-1-4. Electromagnetic compatibility (EMC). Part 1-4: Rationale for limiting power-frequency conducted harmonic and interharmonic current emissions from equipment, in the frequency range up to 9 kHz |
01/204703 DC |
IEC 61000-4-20. Ed.1.0. Electromagnetic compatibility (EMC). Part 4-20: Testing and measurement techniques. Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
01/204707 DC |
IEC 61000-6-6. Electromagnetic compatibility (EMC). Part 6-6: Generic standards. HEMP immunity for indoor equipment |
01/205416 DC |
prEN 50373. Wind turbines. Electromagnetic compatibility |
01/205765 DC |
IEC 61000-4-21. Electromagnetic compatibility (EMC). Part 4: Testing and measurement techniques. Section 21: Reverberation chamber test methods |
01/209170 DC |
IEC 62132-5. Ed.1. Integrated circuits, measurement of electromagnetic immunity. Part 5: Measurement of conducted immunity. Workbench Faraday cage method |
01/209602 DC |
IEC 61043/A1. Ed.1. Electroacoustics. Instruments for the measurement of sound intensity. Measurement with pairs of pressure sensing microphones. Electromagnetic and electrostatic compatibility requirements and test procedures |
02/203734 DC |
IEC 61000-2-8. Ed.1. Electromagnetic compatibility (EMC). Part 2-8: Environment. Voltage dips and short interruptions on public electric power supply systems with statistical measurement results |
02/204265 DC |
IEC 61000-4-33. Ed.1. Electromagnetic compatibility (EMC). Part 4-33: Testing and measurement techniques. Methods and means of measurements of high power transient parameters |
02/204266 DC |
IEC 61000-1-5 TR. Ed.1. Electromagnetic compatibility (EMC). Part 1-5: General. High power electromagnetic (HPEM) effects on civil systems |
02/204753 DC |
IEC 61000-2-13. Ed. 1. Electromagnetic compatibility (EMC). Part 2-13: Environment. High-power electromagnetic environments (HPEM). Radiated and conducted |
02/204840 DC |
prEN 50217. In situ measurements of disturbance emission |
02/205277 DC |
CISPR 32 TR. Ed.1.0. EMC basic and generic standards. Rationale for emission limits |
02/205818 DC |
Draft EN 50370-1. Electromagnetic compatibility (EMC). Product family standard for machine tools. Part 1. Emission |
02/206827 DC |
IEC 61000-4-4. Ed.2. Electromagnetic compatibility (EMC). Part 4-4 : Testing and measurement techniques. Electrical fast transient/burst immunity test. Basic EMC publication |
02/206829 DC |
IEC 61000-4-12. Ed.2. Electromagnetic compatibility (EMC). Part 4-12: Testing and measurement techniques. Oscillatory waves immunity test. Basic EMC publication |
02/207233 DC |
IEC 61000-4-5. Ed.2. Electromagnetic compatibility (EMC). Part 4-5: Testing and measurement techniques. Surge immunity test |
02/208194 DC |
Draft IEC 62132-4 Ed.1.0. Integrated circuits. Measurement of electromagnetic immunity. Part 4. Measurement of conducted immunity. Direct RF power injection method |
02/208922 DC |
IEC 62054-11. Electricity metering equipment (a.c.). Tariff and load control. Part 11: Particular requirements for electronic ripple control receivers |
02/564924 DC |
ISO 21647. Medical electrical equipment. Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors |
02/700414 DC |
EN 12015. Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Emission |
02/700415 DC |
EN 12016. Electromagnetic compatibility. Product family standard for lifts, escalators and passenger conveyors. Immunity |
CEPT T/CD 01-13 |
Engineering requirements for a voice plus data system |
CISPR 14-1 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission / Note: This document and its separate amendments continue to be valid together with the consolidated version |
CISPR 14-1 AMD 1 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission; Amendment 1 |
CISPR 14-1 AMD 2 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission; Amendment 2 |
CISPR 14-1 Edition 4.2 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission / Note: Combines CISPR 14-1 (2000-03), AMD 1 (2001-08) and AMD 2 (2002-08) |
CISPR 14-2 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard / Note: This document and its separate amendments continue to be valid together with the consolidated |
CISPR 14-2 AMD 1 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity; Product family standard; Amendment 1 |
CISPR 14-2 Edition 1.1 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity; Product family standard / Note: Combines CISPR 14-2 (1997-02) and AMD 1 (2001-08) |
CISPR 15 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment / Note: This document and its separate amendments continue to be valid together with the consolidated version |
CISPR 15 AMD 1 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment; Amendment 1 |
CISPR 15 AMD 2 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment; Amendment 2 |
CISPR 15 Edition 6.2 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment / Note: Combines CISPR 15 (2000-08), AMD 1 (2001-10) and AMD 2 (2002-08) |
CISPR 16-2 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2: Methods of measurement of disturbances and immunity / Note: This document and its separate amendments continue to be valid together with the consolidated version |
CISPR 16-2 AMD 1 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2: Methods of measurement of disturbances and immunity; Amendment 1 |
CISPR 16-2 AMD 2 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2: Methods of measurement of disturbances and immunity; Amendment 2 |
CISPR 16-2 Edition 1.1 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2: Methods of measurement of disturbances and immunity |
CISPR 16-2 Edition 1.2 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2: Methods of measurement of disturbances and immunity / Note: Combines CISPR 16-2 (1996-11), AMD 1 (1999-06) and AMD 2 (2002-08) |
CISPR 16-4 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4: Uncertainty in EMC measurements |
CISPR 24 AMD 1 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement; Amendment 1 |
CISPR 24 AMD 2 |
Information technology equipment - Immunity characteristics - Limits and methods of measurement; Amendment 2 |
CISPR/A(CO)67 |
Amendment to CISPR 60016 part 3 section 3: a model for calculation of limits |
CISPR/A/362/CDV*CISPR 60016-2 AMD 2*CISPR-PN 16-2/A2/f1 |
Amendment 2 to CISPR 16-2, Ed. 1: Specification for radio disturbance and immunity measuring apparatus and methods - Part 2: Methods of measurement of disturbances and immunity ((a) New subclause 2.3.5: Measurement times and scan rates for continuous |
CISPR/A/363/CDV*CISPR 60016-2 AMD 2*CISPR-PN 16-2/A2/f6 |
Amendment 2 to CISPR 16-2, Ed. 1: Specification for radio disturbance and immunity measuring apparatus and methods - Part 2: Methods of measurement of disturbances and immunity (Clause 2.6.2.9: Measurements in absorber-lined shielded enclosures - Uniform |
CISPR/A/364/CDV*CISPR 60016-2 AMD 2*CISPR-PN 16-2/A2/f4 |
Amendment 2 to CISPR 16-2, Ed. 1: Specification for radio disturbance and immunity measuring apparatus and methods - Part 2: Methods of measurement of disturbances and immunity (Clause 2.6.2.9: Measurements in absorber-lined shielded enclosures; Emission |
CISPR/A/389/CDV*CISPR 61000-4-21*CISPR-PN 61000-4-21 |
Electromagnetic Compatibility (EMC) - Part 4-21: Testing and measurement techniques; Reverberation chamber test methods |
CISPR/A/419/FDIS*CISPR 61000-4-20*CISPR-PN 61000-4-20 |
IEC 61000-4-20: Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques; Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
CISPR/F/358/CDV*CISPR 60015 AMD 3*CISPR-PN 15/A3 |
Amendment 3 to CISPR 15, Ed. 6: Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (concerns electrode less lamps) |
CISPR/TR 16-3 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: Reports and recommendations of CISPR / Note: This document and its separate amendments continue to be valid together with the consolidated version |
CISPR/TR 16-3 AMD 1 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: Reports and recommendations of CISPR; Amendment 1 |
CISPR/TR 16-3 Edition 1.1 |
Specification for radio disturbance and immunity measuring apparatus and methods - Part 3: Reports and recommendations of CISPR / Note: Combines CISPR 16-3 (2000-05) and AMD 1 (2002-06)*CD-ROM |
CISPR/TR 30 |
Test method on electromagnetic emissions from electronic ballasts for single- and double-capped fluorescent lamps |
ECMA-328 |
Detection and measurement of chemical emissions from electronic equipment |
ECMA/TR 74 |
A guide to the application of the EMC Directive to ITE |
TBR 7 |
Electomagnetic Compatibility and Radio spectrum Matters (ERM) - European Radio Message System (ERMES) - Receiver requirements |
TBR 23 |
Electromagnetic Compatibility and Radio Matters (ERM) - Terrestrial Flight Telecommunications System (TFTS) - Technical requirements for TFTS |
ETR 108 |
European digital cellular telecommunications system (phase 2); GSM electro magnetic compatibility (EMC) considerations (GSM 05.90) |
ETR 108/A1 |
European digital cellular telecommunications system (phase 2); GSM Electro Magnetic Compatibility (EMC) considerations (GSM 05.90); Amendment A1 |
ETR 151 |
Equipment Engineering (EE) - Electro-Magnetic Compatibility (EMC) testing of telecommunication equipment above 1 GHz |
ETR 238 |
CENELEC/ETSI standardization programme for the development of Harmonized Standards related to Electro-Magnetic Compatibility (EMC) in the field of telecommunications |
ETR 273-1-1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties - Part 1: Uncertainties in the measurement of mobile radio |
ETR 273-1-2 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties - Part 1: Uncertainties in the measurement of mobile radio |
ETR 273-2 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties - Part 2: Anechoic chamber |
ETR 273-3 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties - Part 2: Anechoic chamber with a ground plane |
ETR 273-4 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties - Part 4: Open area test site |
ETR 273-5 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties - Part 5: Striplines |
ETR 273-6 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties - Part 6: Test fixtures |
ETR 273-7 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Improvement of radiated methods of measurement (using test sites) and evaluation of the corresponding measurement uncertainties - Part 7: Artificial human beings |
ETR 357 |
European digital cellular telecommunications system - GSM Electro Magnetic Compatibility (EMC) considerations (GSM 05.90 version 5.0.0) |
ETS 300065/prA1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX) - Technical characteristics and methods of measurement; Amendment A1 |
ETS 300113/A1 |
Radio Equipment and Systems (RES) - Land mobile service - Technical characteristics and test conditions for radio equipment intended for the transmission of data (and speech) and having an antenna connector; Amendment A1 |
ETS 300133-1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Enhanced Radio Message System (ERMES) - Part 1: General aspects |
ETS 300133-2 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Enhanced Radio Message System (ERMES) - Part 2: Service aspects |
ETS 300133-3 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Enhanced Radio Message System (ERMES) - Part 3: Network aspects |
ETS 300133-4 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Enhanced Radio Message System (ERMES) - Part 4: air interface specification |
ETS 300133-5 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Enhanced Radio Message System (ERMES) - Part 5: Receiver conformance specification |
ETS 300133-6 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Enhanced Radio Message System (ERMES) - Part 6: Base station conformance specification |
ETS 300133-7 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Enhanced Radio Message System (ERMES) - Part 7: Operation and maintenance aspects |
ETS 300135/A1 |
Radio Equipment and Systems (RES) - Angle-modulated Citizens' Band radio equipment (CEPT PR 27 radio equipment) - Technical characteristics and methods of measurement; Amendment A1 |
ETS 300162 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands - Technical characteristics and methods of measurement |
ETS 300224 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - On-site paging service - Technical and functional characteristics for on-site paging systems, including test methods |
ETS 300279 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) standard for Private land Mobile Radio (PMR) and ancillary equipment (speech and/or non-speech) |
ETS 300279/A1 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) standard for Private land Mobile Radio (PMR) and ancillary equipment (speech and/or non-speech); Amendment A1 |
ETS 300296/A1 |
Radio Equipment and Systems (RES) - Land mobile service - Technical characteristics and test conditions for radio equipment using integral antennas intended primarily for analogue speech; Amendment A1 |
ETS 300326-1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Terrestrial Flight Telecommunications System (TFTS) - Part 1: Speech services, facilities and requirements |
ETS 300326-2 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Terrestrial Flight Telecommunications System (TFTS) - Part 2: Speech services, radio interface |
ETS 300326-3 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Terrestrial Flight Telecommunications System (TFTS) - Part 3: Speech services, network aspects |
ETS 300329 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) for Digital Enhanced Cordless Telecommunications (DECT) equipment |
ETS 300340 |
Radio Equipment and Systems (RES) - Electro-Magnetic Compatibility (EMC) for European Radio Message System (ERMES) paging receivers |
ETS 300340/A1 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) for European Radio Message System (ERMES) paging receivers; Amendment A1 |
ETS 300341/A1 |
Radio Equipment and Systems (RES) - Land mobile service - Technical characteristics and test conditions for radio equipment using an integral antenna transmitting signals to initiate a specific response in the receiver; Amendment A1 |
ETS 300342-1 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) for European digital cellular telecommunications system (GSM 900 MHz and DCS 1800 MHz) - Part 1: Mobile and portable radio and ancillary equipment |
ETS 300342-2 |
Radio Equipment and Systems (RES) - Electro-Magnetic Compatibility (EMC) for European digital cellular telecommunications systems (GSM 900 MHz and DCS 1800 MHz) - Part 2: Base station and ancillary equipment |
prETS 300342-3 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) for European digital cellular telecommunications systems (GSM 900 MHz and DCS 1800 MHz) - Part 3: Base station radio and ancillary equipment and repeaters meeting Phase 2 GSM require |
ETS 300385 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) standard for digital fixed radio links and ancillary equipment with data rates at around 2 Mbit/s and above |
ETS 300385/A1 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) standard for digital fixed radio links and ancillary equipment with data rates at around 2 Mbit/s and above; Amendment A1 |
ETS 300386-1 Corrigendum |
Equipment Engineering (EE) - Public telecommunication network equipment Electromagnetic Compatibility (EMC) requirements - Part 1: Product family overview, compliance criteria and test levels; Corrigendum |
prETS 300386-2-2 |
Equipment Engineering (EE) - Public telecommunication network equipment Electromagnetic Compatibility (EMC) requirements - Part 2: Product specific compliance criteria and operating conditions - Subpart 2: Transmission equipment |
prETS 300386-2-3 |
Equipment Engineering (EE) - Public telecommunication network equipment Electromagnetic Compatibility (EMC) requirements - Part 2: Product specific compliance criteria and operating conditions - Subpart 3: Power supply equipment |
prETS 300386-2-4 |
Equipment Engineering (EE) - Public telecommunication network equipment Electromagnetic Compatibility (EMC) requirements - Part 2: Product specific compliance criteria and operating conditions - Subpart 4: Supervisory equipment |
ETS 300390/A1 |
Radio Equipment and Systems (RES) - Land mobile service - Technical characteristics and test conditions for radio equipment intended for the transmission of data (and speech) and using an integral antenna; Amendment A1 |
ETS 300441/prA1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Technical characteristics and methods of measurement for maritime radiotelephone watch receivers for the distress and calling frequency 2182 kHz; Amendment A1 |
ETS 300445 |
Radio Equipment and Systems (RES) - Electro-Magnetic Compatibility (EMC) standard for wireless microphones and similar Radio Frequency (RF) audio link equipment |
ETS 300445/A1 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) standard for wireless microphones and similar Radio Frequency (RF) audio link equipment; Amendment A1 |
ETS 300446 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) standard for second generation Cordless Telephone (CT2) apparatus operating in the frequency band 864,1 MHz to 868,1 MHz, including public access services |
ETS 300447 |
Radio Equipment und Systems (RES) - Electromagnetic Compatibility (EMC) standard for VHF FM broadcasting transmitters |
ETS 300454/A1 |
Radio Equipment and Systems (RES) - Wide band audio links - Technical characteristics and test methods; Amendment A1 |
ETS 300673 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) standard for 4/6 GHz and 11/12/14 GHz Very Small Aperture Terminal (VSAT) equipment and 11/12/13/14 GHz Satellite News Gathering (SNG) Transportable Earth Station (TES) equipment |
ETS 300680-1 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) standard for Citizens' Band (CB) radio and ancillary equipment (speech and/or non-speech) - Part 1: Angle-modulated |
ETS 300680-2 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) standard for Citizen's Band (CB) radio and ancillary equipment (speech and/or non-speech) - Part 2: Double Side Band (DSB) and/or Single Side Band (SSB) |
ETS 300682 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) standard for On-Site Paging equipment |
ETS 300683 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) standard for Short Range Devices (SRD) operating on frequencies between 9 kHz and 25 GHz |
ETS 300684 |
Radio Equipment and Systems (RES) - Electromagnetic Compatibility (EMC) standard for commercially available amateur radio equipment |
ETS 300717 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) for analogue cellular radio communications equipment - Mobile and portable equipment |
ETS 300741 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) standard for wide-area paging equipment |
ETS 300826 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) standard for 2,4 GHz wideband transmission systems and High Performance Radio Local Area Network (HIPERLAN) equipment |
prEN 54-17 |
Fire detection and fire alarm systems - Part 17: Short circuit isolators |
CLC/R 106-001 |
Guidelines for product committees on the preparation of standards related to human exposure from electromagnetic fields |
CLC/R 210-003 |
Guidelines on how to use anechoic enclosures that do not fulfil the requirements regarding normalized site attenuation for pre-compliance tests of products |
CLC/R 210-004 |
Recommendations on filters for shielded enclosures |
CLC/R 210-005 |
Recommendations for shielded enclosures |
CLC/R 210-008 |
Guide to EMC conformity of apparatus designed for military and other purposes |
CLC/R 210-009 |
Operation, composition and terms of reference of the Standards Overview Group of CLC/TC 210 "EMC" |
CLC/R 210-010 |
Electromagnetic compatibility - Emission measurements in fully anechoic chambers |
prEN 474-1 |
Earth-moving machinery - Safety - Part 1: General requirements |
EN 474-1/A1 |
Earth-moving machinery - Safety - Part 1: General requirements; Amendment A1 |
EN 617 |
Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
EN 618 |
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
EN 619 |
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
EN 620 |
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
EN 794-1 |
Lung ventilators - Part 1: Particular requirements for critical care ventilators |
EN 794-1/A1 |
Lung ventilators - Part 1: Particular requirements for critical care ventilators; Amendment A1 |
prEN 3758 |
Aerospace series - Simplex high speed data transmission system |
EN 12015 |
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Emission |
prEN 12015 |
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Emission |
EN 12016 |
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Immunity |
prEN 12016 |
Electromagnetic compatibility - Product family standard for lifts, escalators and passenger conveyors - Immunity |
EN 12182 |
Technical aids for disabled persons - General requirements and test methods |
EN 12368 |
Traffic control equipment - Signal heads |
EN 12895 |
Industrial trucks - Electromagnetic compatibility |
EN 13309 |
Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply |
prCEN/TS 14507-1 |
Inhalational nitric oxide systems - Part 1: Delivery systems |
EN 50065-1 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances |
EN 50065-2-2 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments |
EN 50065-2-3 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers & distributors |
EN 50083-2 |
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment |
EN 50083-5 |
Cabled networks for television signals, sound signals and interactive services - Part 5: Headend equipment |
EN 50083-8 |
Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks |
EN 50085-1 |
Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements |
EN 50085-1/A1 |
Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements; Amendment A1 |
EN 50085-1/prA2 |
Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements; Amendment A2 |
EN 50086-1 |
Conduit systems for cable management - Part 1: General requirements |
EN 50086-1/prA1 |
Conduit systems for electrical installations - Part 1: General requirements; Amendment A1 |
EN 50091-2 |
Uninterruptible power systems (UPS) - Part 2: EMC requirements |
EN 50091-2/prA1 |
Uninterruptible power systems (UPS) - Part 2: EMC requirements; Amendment A1 |
prEN 50097 |
Medical electrical equipment; part 1: general requirements for safety; collateral standard: electromagnetic compatibility |
EN 50121-1 |
Railway applications - Electromagnetic compatibility - Part 1: General |
EN 50121-2 |
Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world |
EN 50121-3-1 |
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock; Train and complete vehicle |
EN 50121-3-2 |
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock; Apparatus |
EN 50121-4 |
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
EN 50121-5 |
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
prEN 50125-3 |
Railway applications - Environmental conditions for equipment - Part 3: Equipment for signalling and telecommunications |
EN 50130-4 |
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems |
EN 50130-4/A1 |
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems; Amendment A1 |
EN 50130-4/A2 |
Alarm systems - Part 4: Electromagnetic compatibility; Product family standard: Immunity requirements for components of fire, intruder and social alarm systems; Amendment A2 |
EN 50133-1 |
Alarm systems - Access control systems for use in security applications - Part 1: System requirements |
EN 50133-1/A1 |
Alarm systems - Access control systems for use in security applications - Part 1: System requirements; Amendment A1 |
EN 50133-2-1 |
Alarm systems - Access control systems for use in security applications - Part 2-1: General requirements for components |
EN 50133-7 |
Alarm systems - Access control systems for use in security applications - Part 7: Application guidelines |
EN 50147-1 |
Anechoic chambers - Part 1: Shield attenuation measurement |
EN 50147-2 |
Anechoic chambers - Part 2: Alternative test site suitability with respect to site attenuation |
prEN 50147-3 |
Electromagnetic compatibility - Basic emission standard - Part 3: Emission measurements in fully anechoic rooms |
EN 50173-1 |
Information technology - Generic cabling systems - Part 1: General requirements and office areas |
EN 50174-2 |
Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings |
prEN 50174-3 |
Information technology - Cabling installation - Part 3: Installation planning and practices outside buildings |
EN 50194 |
Electrical apparatus for the detection of combustible gases in domestic premises - Test methods and performance requirements |
EN 50199 |
Electromagnetic compatibility (EMC) - Product standard for arc welding equipment |
EN 50206-2 |
Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Panthographs for metros and light rail vehicles |
prEN 50217 |
Draft standard for in-situ emission measurements |
prEN 50220 |
Hearing aids - General requirements |
prEN 50222 |
Standard for the evaluation of measurement results taking measurement uncertainty into account |
prEN 50226 |
Electromagnetic compatibility of rechargeable cells or batteries |
prEN 50228-1 |
Performance requirements and test methods for control and monitoring pH analysers for use in the water industry - Part 1: Specification and test methods for assessing performance under laboratory conditions |
prEN 50236 |
Electromagnetic compatibility for power transformers |
prEN 50238 |
Railway applications - Compatibility between rolling stock and train detection systems |
EN 50262 |
Metric cable glands for electrical installations |
EN 50262/A1 |
Metric cable glands for electrical installations; Amendment A1 |
EN 50263 |
Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment |
EN 50270 |
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen |
EN 50293 |
Electromagnetic compatibility - Road traffic signal systems - Product standard |
EN 50310 |
Application of equipotential bonding and earthing in buildings with information technology equipment |
prEN 50314-2 |
Photovoltaic systems - Charge regulators - Part 2: EMC - Test requirements and procedures |
prEN 50316-2 |
Photovoltaic lighting systems - Part 2: EMC - Test requirements and procedures |
prEN 50322-1 |
Photovoltaic systems - Part 1: Electromagnetic compatibility (EMC) - Requirements for photovoltaic pumping systems |
prEN 50323 |
General requirements for hearing aids |
prEN 50343 |
Railway applications - Rolling stock - Rules for installation of cabling |
prEN 50351 |
Basic standard for the calculation and measurement methods relating to the influence of electric power supply and traction systems on telecommunication systems |
prEN 50352 |
Limits relating to the influence of electric power supply and traction systems on telecommunication systems |
EN 50357 |
Evaluation of human exposure to electromagnetic fields from devices used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications |
EN 50360 |
Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz) |
EN 50361 |
Basic standard for the measurement of Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones (300 MHz - 3 GHz) |
EN 50364 |
Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 10 GHz, used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications |
prEN 50369 |
Liquid tight sheathing systems for cable management |
prEN 50370-1 |
Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission |
EN 50370-2 |
Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity |
EN 50371 |
Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz) - General public |
EN 50383 |
Basic standard for the calculation and measurement of electromagnetic field strength and SAR related to human exposure from radio base stations and fixed terminal stations for wireless telecommunication systems (110 MHz - 40 GHz) |
EN 50384 |
Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic field |
EN 50385 |
Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic field |
prEN 50392 |
Generic standard to demonstrate the compliance of electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (0 Hz - 300 GHz) |
EN 55013 |
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement (CISPR 13:2001, modified) |
EN 55013/A1 |
Amendment 1 to CISPR 13, Ed. 4 : Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement |
EN 55014-1 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission (CISPR 14-1:2000) |
EN 55014-1/A1 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission; Amendment A1 (CISPR 14-1:2000/A1:2001) |
EN 55014-1/A2 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission; Amendment A2 (CISPR 14-1:2000/A2:2002) / Note: Endorsement notice |
EN 55014-2 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity product family standard (CISPR 14-2:1997) |
EN 55014-2/A1 |
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity; Product family standard; Amendment A1 (CISPR 14-2:1997/A1:2001) |
EN 55014-2/prA2 |
Requirements for toys; Amendment A2 |
EN 55015 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (CISPR 15:2000) |
EN 55015/A1 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment; Amendment A1 (CISPR 15:2000/A1:2001) / Note: Endorsement notice |
EN 55015/A2 |
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment; Amendment A2 (CISPR 15:2000/A2:2002) / Note: Endorsement notice |
EN 55015/prA3 |
Amendment to CISPR 15, Ed. 6.0: Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment (concerns electrodeless lamps) |
EN 55020 |
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement (CISPR 20:2002) |
EN 55020/prA2 |
Draft Amendment 2 to CISPR 20, Ed. 5: Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement |
prEN 55024-3 |
CISPR 24: immunity of information technology equipment (ITE); part 3: radiated radio frequency fields requirements |
prEN 55101-2 |
Electromagnetic compatibility requirements for information technology equipment; part 2: electrostatic discharge requirements (CISPR/G(CO)10:1991) |
EN 55103-1 |
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission |
EN 55103-2 |
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity |
prEN 55105 |
Electromagnetic compatibility immunity requirements for telecommunication terminal equipment |
prEN 55106 |
Electromagnetic compatibility immunity requirements for information technical equipment excluding telecommunication terminal equipment |
EN 60034-1 |
Rotating electrical machines - Part 1: Rating and performance (IEC 60034-1:1996, modified) |
EN 60034-1/A1 |
Rotating electrical machines - Part 1: Rating and performance; Amendment A1 (IEC 60034-1:1996/A1:1997) |
EN 60034-1/A2 |
Rotating electrical machines - Part 1: Rating and performance; Amendment A2 (IEC 60034-1:1996/A2:1999) |
EN 60034-1/A11 |
Rotating electrical machines - Part 1: Rating and performance; Amendment A11 |
EN 60076-1 |
Power transformers - Part 1: General (IEC 60076-1:1993, modified) |
EN 60076-1/A1 |
Power transformers - Part 1: General; Amendment A1 (IEC 60076-1:1993/A1:1999) |
EN 60076-1/A12 |
Power transformers - Part 1: General; Amendment A12 |
EN 60077-1 |
Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules (IEC 60077-1:1999, modified) |
EN 60118-13 |
Hearing aids - Part 13: Electromagnetic compatibility (EMC) (IEC 60118-13:1997) |
prEN 60118-13 |
IEC 60118-13: Hearing aids - Part 13: Electromagnetic compatibility (EMC); Product standard |
EN 60146-2 |
Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters (IEC 60146-2:1999) |
EN 60255-25 |
Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment (IEC 60255-25:2000) |
prEN 60255-26 |
IEC 60255-26: Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements for measuring relays and protection equipment |
EN 60269-1 |
Low-voltage fuses - Part 1: General requirements (IEC 60269-1:1998) |
prEN 60297-3-101 |
IEC 60297-3-101: Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units |
prEN 60297-3-102 |
IEC 60297-3-102: Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-102: Injector/extractor handle |
prEN 60297-3-103 |
IEC 60297-3-103: Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-103: Keying and alignment pin |
EN 60297-5-100 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-100: Subracks and associated plug-in units; Design overview (IEC 60297-5-100:2001) |
EN 60297-5-101 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-101: Subracks and associated plug-in units; Injector/extractor handle (IEC 60297-5-101:2001) |
EN 60297-5-102 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-102: Subracks and associated plug-in units; Electromagnetic shielding provision (IEC 60297-5-102:2001) / Note: Includes Corrigend |
EN 60297-5-103 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-103: Subracks and associated plug-in units; Electrostatic discharge protection (IEC 60297-5-103:2001) |
EN 60297-5-104 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-104: Subracks and associated plug-in units; Keying (IEC 60297-5-104:2001) |
EN 60297-5-105 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-105: Subracks and associated plug-in units; Alignment and/or earth pin (IEC 60297-5-105:2001) |
EN 60297-5-107 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-107: Subracks and associated plug-in units; Rear mounted plug-in units (IEC 60297-5-107:2001) |
EN 60439-1/prA1 |
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
EN 60495 |
Single sideband power-line carrier terminals (IEC 60495:1993) |
EN 60555-1 |
Disturbances in supply systems caused by household appliances and similar electrical equipment. Part 1 : Definitions. |
EN 60601-1 |
Medical electrical equipment; part 1: general requirements for safety (IEC 60601-1:1988) |
prEN 60601-1 |
IEC 60601-1, Ed. 3: Medical electrical equipment - Part 1: General requirements for safety and essential performance |
EN 60601-1/A1 |
Medical electrical equipment; part 1: general requirements for safety; amendment A1 (IEC 60601-1:1988/A1:1991) |
EN 60601-1/A2 |
Medical electrical equipment - Part 1: General requirements for safety; Amendment A2 (IEC 60601-1:1988/A2:1995 + Corrigendum 1995) |
EN 60601-1/A12 |
Medical electrical equipment; part 1: general requirements for safety; amendment A12 |
EN 60601-1-2 |
Medical electrical equipment - Part 1-2: General requirements for safety; Collateral standard: Electromagnetic compatibility; Requirements and tests (IEC 60601-1-2:2001) |
EN 60601-2-18 |
Medical electrical equipment - Part 2: Particular requirements for the safety of endoscopic equipment (IEC 60601-2-18:1996) |
EN 60601-2-18/A1 |
Medical electrical equipment - Part 2-18: Particular requirements for the safety of endoscopic equipment; Amendment A2 (IEC 60601-2-18:1996/A1:2000) |
EN 60601-2-24 |
Medical electrical equipment - Part 2: Particular requirements for the safety of infusion pumps and controllers (IEC 60601-2-24:1998) |
EN 60601-2-29 |
Medical electrical equipment - Part 2-29: Particular requirements for the safety of radiotherapy simulators (IEC 60601-2-29:1999) |
EN 60601-2-31 |
Medical electrical equipment - Part 2: Particular requirements for the safety of external cardiac pacemakers with internal power source (IEC 60601-2-31:1994) |
EN 60601-2-31/A1 |
Medical electrical equipment - Part 2-31: Particular requirements for the safety of external cardiac pacemakers with internal power source; Amendment A1 (IEC 60601-2-31:1994/A1:1998) |
EN 60601-2-35 |
Medical electrical equipment - Part 2: Particular requirements for the safety of blankets, pads and mattresses, intended for heating in medical use (IEC 60601-2-35:1996) |
EN 60601-2-40 |
Medical electrical equipment - Part 2-40: Particular requirements for the safety of electromygraphs and evoked response equipment (IEC 60601-2-40:1998) |
EN 60651 |
Sound level meters (IEC 60651:1993) |
EN 60651/A1 |
Sound level meters (IEC 60651:1979/A1:1993); amendment 1 |
EN 60651/A2 |
Sound level meters; Amendment A2 (IEC 60651:1979/A2:2000) |
EN 60669-1 |
Switches for household and similar fixed-electrical installations - Part 1: General requirements (IEC 60669-1:1998, modified) |
EN 60669-1/A1 |
Switches for household and similar fixed-electrical installations - Part 1: General requirements; Amendment A1 (IEC 60669-1:1998/A1:1999, modified) |
EN 60694 |
Common specifications for high-voltage switchgear and controlgear standards (IEC 60694:1996) |
EN 60694/A1 |
Common specifications for high-voltage switchgear and controlgear standards; Amendment A1 (IEC 60694:1996/A1:2000) |
EN 60694/A2 |
Common specifications for high-voltage switchgear and controlgear standards; Amendment A2 (IEC 60694:1996/A2:2001) |
EN 60730-1 |
Automatic electrical controls for household and similar use; part 1: general requirements |
EN 60730-1 |
Automatic electrical controls for household and similar use - Part 1: General requirements (IEC 60730-1:1999, modified) |
EN 60730-1/A14 |
Automatic electrical controls for household and similar use - Part 1: General requirements; Amendment A14 |
EN 60730-1/prA1 |
Automatic electrical controls for household and similar use - Part 1: General requirements |
EN 60730-1/prA18 |
Automatic electrical controls for household and similar use - Part 1: General requirements |
EN 60730-1/prAA |
Automatic electrical controls for household and similar use - Part 1: General requirements; Amendment AA |
EN 60730-1/prAB |
Automatic electrical controls for household and similar use - Part 1: General requirements; Amendment AB |
EN 60730-2-9/prA2 |
Amendment 2 to IEC 60730-2-9, Ed. 2: Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
EN 60730-2-13 |
Automatic electrical controls for household and similar use - Part 2: Particular requirements for humidity sensing controls (IEC 60730-2-13:1995, modified) |
EN 60730-2-13/A1 |
Automatic electrical controls for household and similar use - Part 2: Particular requirements for humidity sensing controls; Amendment A1 (IEC 60730-2-13:1995/A1:1997) |
EN 60730-2-13/A2 |
Automatic electrical controls for household and similar use - Part 2: Particular requirements for humidity sensing controls; Amendment A2 (IEC 60730-2-13:1995/A2:2000, modified) |
EN 60831-1 |
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 kV - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation (IEC 60831-1:1996) |
EN 60868 |
Flickermeter; functional and design specifications (IEC 60868:1986 + A1:1990) |
EN 60870-2-1 |
Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility (IEC 60870-2-1:1995) |
EN 60898/A12 |
Circuit-breakers for overcurrent protection for household and similar installations; Amendment A12 |
EN 60938-1 |
Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification (IEC 60938-1:1999) |
EN 60938-2 |
Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification (IEC 60938-2:1999) |
EN 60938-2-1 |
Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D (IEC 60938-2:1999) |
EN 60938-2-2 |
Fixed inductors for electromagnetic interference suppression - Part 2-2: Blank detail specification - Inductors for which safety tests are required (only) (IEC 60938-2-2:1999) |
EN 60947-1 |
Low-voltage switchgear and controlgear - Part 1: General rules (IEC 60947-1:1999, modified) |
EN 60947-1/A1 |
Low-voltage switchgear and controlgear - Part 1: General rules; Amendment A1 (IEC 60947-1:1999/A1:2000) |
EN 60947-1/A2 |
Low-voltage switchgear and controlgear - Part 1: General rules; Amendment A2 (IEC 60947-1:1999/A2:2001) |
EN 60947-2 |
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers (IEC 60947-2:1995) |
EN 60947-2/A1 |
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers; Amendment A1 (IEC 60947-2:1995/A1:1997) |
EN 60947-2/A2 |
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers; Amendment A2 (IEC 60947-2:1995/A2:2001) |
EN 60947-2/prA3 |
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
EN 60947-3 |
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units (IEC 60947-3:1999) |
EN 60947-3/A1 |
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units; Amendment A1 (IEC 60947-3:1999/A1:2001) |
EN 60947-4-3 |
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads (IEC 60947-4-3:1999) |
EN 60947-5-1 |
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:1997) |
EN 60947-5-1/A1 |
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices; Amendment A1 (IEC 60947-5-1:1997/A1:1999) |
EN 60947-5-1/A2 |
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (IEC 60947-5-1:1997/A2:1999); Amendment A2 |
EN 60947-5-1/A12 |
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices; Amendment A12 |
EN 60947-5-1/prA3 |
Amendment 3 to IEC 60947-5-1 (1997-10) |
EN 60947-5-2 |
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches (IEC 60947-5-2:1997, modified) |
EN 60947-5-2/A1 |
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches; Amendment A1 (IEC 60947-5-2:1997/A1:1999) |
EN 60947-6-1/A2 |
Low-voltage switchgear and controlgear - Part 6: Multiple function equipment - Section 1: Automatic transfer switching equipment; Amendment A2 (IEC 60947-6-1:1989/A2:1997) |
EN 60947-6-2/A1 |
Low-voltage switchgear and controlgear - Part 6: Multiple function equipment - Section 2: Control and protective switching devices (or equipment) (CPS); Amendment A1 (IEC 60947-6-2:1992/A1:1997) |
EN 60947-6-2/A2 |
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS); Amendment 2 (IEC 60947-6-2:1992/A2:1998) |
EN 60947-6-2/prA3 |
Amendment 3 to IEC 60947-6-2, Ed. 1.0 |
EN 60947-8 |
IEC 60947-8: Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection for rotating electrical machines |
EN 60974-10 |
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements |
prEN 60974-10/prAA |
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements; Amendment AA |
EN 60998-1/A1 |
Connecting devices for low voltage circuits for household and similar purposes - Part 1: General requirements; Amendment A1 (IEC 60998-1:1990/A1:1998) |
EN 61000-2-2 |
Electromagnetic compatibility (EMC) - Part 2-2: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems (IEC 61000-2-2:2002) / Note: Endorsement notice |
EN 61000-2-4 |
Electromagnetic compatibility (EMC) - Part 2-4: Environment; Compatibility levels in industrial plants for low-frequency conducted disturbances (IEC 61000-2-4:2002) / Note: Endorsement notice |
EN 61000-2-9 |
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance - Basic EMC publication (IEC 61000-2-9:1996) |
EN 61000-2-10 |
Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance (IEC 61000-2-10:1998) |
prEN 61000-2-11 |
IEC 61000-2-11: Electromagnetic compatibility (EMC) - Part 2-11: Environment - Classification of HEMP environments |
prEN 61000-2-12 |
Electromagnetic Compatibility (EMC) - Part 2-12: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems; Basic EMC publication |
prEN 61000-2-24 |
IEC 1000-4-24: Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance - Basic EMC publication |
EN 61000-3-2 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions (equipment input current up to and including 16 A per phase) (IEC 61000-3-2:2000, modified) |
EN 61000-3-2/prA1 |
Amendment 1 to IEC 61000-3-2, Ed. 2: Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions (equipment input current <kleiner =>16 A per phase) |
EN 61000-3-3 |
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current <kleiner => 16 A (IEC 61000-3-3:1994) |
EN 61000-3-3/A1 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits; Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <kleiner => 16 A per phase and not subject to conditional |
EN 61000-3-3/prA11 |
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current <kleiner => 16 A |
EN 61000-3-11 |
Electromagnetic compatibility (EMC) - Part 3-11: Limits; Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems; Equipment with rated current <kleiner => 75 A and subject to conditional connection (IEC 61000- |
EN 61000-4-1 |
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques; Overview of IEC 61000-4 series (IEC 61000-4-1:2000) |
EN 61000-4-2 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 2: Electrostatic discharge immunity test - Basic EMC publication (IEC 61000-4-2:1995) |
EN 61000-4-2/A1 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test; Amendment A1 (IEC 61000-4-2:1995/A1:1998) |
EN 61000-4-2/A2 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques; Electrostatic discharge immunity test; Amendment A2 (IEC 61000-4-2:1995/A2:2000) |
EN 61000-4-2/prA3 |
Amendment to IEC 61000-4-2 |
EN 61000-4-2/prAA |
Amendment to IEC 61000-4-2: A test set-up for portable and/or double insulated table top equipment |
EN 61000-4-3 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques; Radiated, radio-frequency, electromagnetic field immunity test (IEC 61000-4-3:2002) |
EN 61000-4-3/A1 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques; Radiated, radio-frequency, electromagnetic field immunity test; Amendment A1 (IEC 61000-4-3:2002/A1:2002) / Note: Endorsement notice |
EN 61000-4-4 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 4: Electrical fast transient/burst immunity test - Basic EMV publication (IEC 61000-4-4:1995) |
EN 61000-4-4/A1 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques; Electrical fast transient/burst immunity test; Amendment A1 (IEC 61000-4-4:1995/A1:2000) |
EN 61000-4-4/A2 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques; Electrical fast transient/burst immunity test; Amendment A2 (IEC 61000-4-4:1995/A2:2001) |
EN 61000-4-4/prAA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-4/prAB |
Amendment to IEC 61000-4-4 (1995) |
EN 61000-4-5 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test (IEC 61000-4-5:1995) |
EN 61000-4-5/A1 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques; Surge immunity test; Amendment A1 (IEC 61000-4-5:1995/A1:2000) |
EN 61000-4-5/prAA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-5/prAB |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
EN 61000-4-6 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to conducted disturbances, induced by radio-frequency fields (IEC 61000-4-6:1996) |
prEN 61000-4-6 |
Electromagnetic Compatibility (EMC) - Part 4-6: Testing and measurement techniques; Immunity to conducted disturbances, induced by radio-frequency fields |
EN 61000-4-6/A1 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques; Immunity to conducted disturbances, induced by radio-frequency fields; Amendment A1 (IEC 61000-4-6:1996/A1:2000) |
EN 61000-4-7 |
Electromagnetic compatibility (EMC); part 4: testing and measurement techniques; section 7: general guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto (IEC 61000-4-7:1991) / No |
EN 61000-4-8 |
Electromagnetic compatibility (EMC); part 4: testing and measurement techniques; section 8: power frequency magnetic field immunity test; basic EMC publication (IEC 61000-4-8:1993) |
EN 61000-4-8/A1 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques; Power frequency magnetic field immunity test; Amendment A1 (IEC 61000-4-8:1993/A1:2000) |
EN 61000-4-8/prAA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-8/prAB |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
EN 61000-4-9 |
Electromagnetic compatibility (EMC); part 4: testing and measurement techniques; section 9: pulse magnetic field immunity test; basic EMC publication (IEC 61000-4-9:1993) |
EN 61000-4-9/A1 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques; Puls magnetic field immunity test; Amendment A1 (IEC 61000-4-9:1993/A1:2000) |
EN 61000-4-9/prAA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-9/prAB |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
EN 61000-4-10 |
Electromagnetic compatibility (EMC); part 4: testing and measurement techniques; section 10: damped oscillatory magnetic field immunity test; basic EMC publication (IEC 61000-4-10:1993) |
EN 61000-4-10/A1 |
Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques; Damped oscillatory magnetic field immunity test; Amendment A1 (IEC 61000-4-10:1993/A1:2000) |
EN 61000-4-10/prAA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-10/prAB |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
EN 61000-4-11 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 11: Voltage dips, short interruptions and voltage variations immunity tests (IEC 61000-4-11:1994) |
EN 61000-4-11/A1 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations immunity tests; Amendment A1 (IEC 61000-4-11:1994/A1:2000) |
EN 61000-4-11/prAA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-11/prAB |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
EN 61000-4-12 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 12: Oscillatory waves immunity tests - Basic EMC publication (IEC 61000-4-12:1995) |
EN 61000-4-12/A1 |
Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques; Oscillatory waves immunity test; Amendment A1 (IEC 61000-4-12:1995/A1:2000) |
EN 61000-4-12/prAA |
Amendment to IEC 61000-4-2: Revision of clause 9: Test results and test report |
EN 61000-4-12/prAB |
Amendment to IEC 61000-4-4 - Sub-clause 8.1.1: Climatic conditions |
EN 61000-4-13 |
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques; Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests (IEC 61000-4-13:2002) / Note: Endorsement notice |
EN 61000-4-14 |
Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test (IEC 61000-4-14:1999) |
EN 61000-4-15 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 15: Flickermeter - Functional and design specifications (IEC 61000-4-15:1997) |
EN 61000-4-15/prA1 |
Amendment 1 to IEC 61000-4-15: Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques; Flickermeter; Functional and design specifications |
EN 61000-4-16 |
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz (IEC 61000-4-16:1998) |
EN 61000-4-17 |
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measurement techniques - Ripple on d.c. input power port immunity test (IEC 61000-4-17:1999) |
prEN 61000-4-20 |
IEC 61000-4-20: Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques; Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
prEN 61000-4-21 |
Electromagnetic Compatibility (EMC) - Part 4-21: Testing and measurement techniques; Reverberation chamber test methods |
EN 61000-4-23 |
Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques; Test methods for protective devices for HEMP and other radiated disturbances (IEC 61000-4-23:2000) |
EN 61000-4-24 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance - Basic EMC publication (IEC 61000-4-24:1997) |
EN 61000-4-25 |
Electromagnetic compatibility (EMC) - Part 4-25: Testing and measuring techniques - HEMP immunity test methods for equipment and systems (IEC 61000-4-25:2001) |
EN 61000-4-27 |
Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques; Unbalance, immunity test (IEC 61000-4-27:2000) |
EN 61000-4-28 |
Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test (IEC 61000-4-28:1999) |
EN 61000-4-29 |
Electromagnetic Compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests (IEC 61000-4-29:2000) |
prEN 61000-4-30 |
IEC 61000-4-30, Ed. 1: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques; Power quality measurement methods |
prEN 61000-5-3 |
Electromagnetic compatibility (EMC) - Part 5-3: Installation and mitigation guidelines - HEMP protection concepts |
EN 61000-5-5 |
Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance - Basic EMC publication (IEC 61000-5-5:1996) |
EN 61000-5-7 |
Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines; Degrees of protection by enclosures against electromagnetic disturbances (EM code) (IEC 61000-5-7:2001) |
EN 61000-6-1 |
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards; Immunity for residential, commercial and light-industrial environments (IEC 61000-6-1:1997, modified) |
EN 61000-6-2 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards; Immunity for industrial environments (IEC 61000-6-2:1999, modified) |
EN 61000-6-3 |
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards; Emission standard for residential, commercial and light-industrial environments (IEC 61000-6-3:1996, modified) |
EN 61000-6-4 |
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards; Emission standard for industrial environments (IEC 61000-6-4:1997, modified) |
prEN 61000-6-6 |
IEC 61000-6-6, Ed. 1: Electromagnetic compatibility (EMC) - Part 6-6: Generic standards; HEMP immunity for indoor equipment |
EN 61008-1 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules (IEC 61008-1:1990 + A1:1992, modified) |
EN 61008-1/A2 |
Electrical accessories - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules; Amendment A2 (IEC 61008-1:1990/A2:1995) |
EN 61008-1/A11 |
Electrical accessories - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules; Amendment A11 |
EN 61008-1/A12 |
Electrical accessories - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules; Amendment A12 |
EN 61008-1/A13 |
Electrical accessories - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules; Amendment A13 |
EN 61008-1/A14 |
Electrical accessories - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules; Amendment A14 |
EN 61008-1/A17 |
Electrical accessories - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules; Amendment A17 |
EN 61008-1/prA15 |
Draft amendment 1 to IEC 61008-1, Ed. 2 |
EN 61008-1/prA16 |
Draft Amendment 2 to IEC 61008-1: Aptitude of RCBBs to withstand high surge currents and additional verifications of correct operation at residual currents between 5 I<(Index)DELTA n> and 500 A |
EN 61009-1 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCOB's) - Part 1: General rules (IEC 61009-1:1991, modified) |
EN 61009-1/A1 |
Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules; Amendment A1 (IEC 61009-1:1991/A1:1995) |
EN 61009-1/A2 |
Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules; Amendment A2 |
EN 61009-1/A11 |
Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules; Amendment A11 |
EN 61009-1/A13 |
Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules; Amendment A13 |
EN 61009-1/A14 |
Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules; Amendment A14 |
EN 61009-1/A15 |
Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCOB's) - Part 1: General rules; Amendment A15 |
EN 61009-1/A17 |
Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules; Amendment A17 |
EN 61009-1/prA18 |
Draft Amendment 2 to IEC 61009-1: Aptitude of RCBOs to withstand high surge currents and additional verifications of correct operation at residual currents between 5 I<(Index)DELTAn> and 500 A |
EN 61095 |
Electromechanical contactors for household and similar purposes (IEC 61095:1992) |
EN 61095/A1 |
Electromechanical contactors for household and similar purposes; Amendment A1 (IEC 61095:1992/A1:2000) |
EN 61204-3 |
Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) (IEC 61204-3:2000) |
EN 61260 |
Electroacoustics - Octave-band and fractional-octave-band filters (IEC 61260:1995) |
EN 61260/A1 |
Electroacoustics - Octave-band and fractional-octave-band filters; Amendment A1 (IEC 61260:1995/A1:2001) |
prEN 61312-1 |
Protection against lightning electromagnetic impulse - Part 1: General principles (IEC 61312-1:1995, modified) |
EN 61326 |
Electrical equipment for measurement, control and laboratory use - EMC requirements (IEC 61326:1997) |
EN 61326/A1 |
Electrical equipment for measurement, control and laboratory use - EMC requirements; Amendment A1 (IEC 61326-1:1997/A1:1998) |
EN 61326/A2 |
Electrical equipment for measurement, control and laboratory use - EMC requirements; Amendment A2 (IEC 61326:1997/A2:2000) |
EN 61543 |
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility (IEC 61543:1995) |
EN 61543/prA11 |
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility; Amendment A11 |
EN 61543/prAB |
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility (IEC 61543:1995/A1:200X - (23E/474/FDIS), modified) |
EN 61547 |
Equipment for general lighting purposes - EMC immunity requirements (IEC 61547:1995) |
EN 61547/A1 |
Equipment for general lighting purposes - EMC immunity requirements; Amendment A1 (IEC 61547:1995/A1:2000) |
prEN 61587-3 |
Draft IEC 61587-3: Electromagnetic shielding performance tests for cabinets, racks and subracks for the IEC 60917 and 60297 series |
EN 61779-1 |
Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods (IEC 61779-1:1998, modified) |
EN 61800-3 |
Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods (IEC 61800-3:1996) |
prEN 61800-3 |
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
EN 61800-3/A11 |
Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods; Amendment A11 |
prEN 61867 |
IEC 61867: Electrical accessories for household and similar uses - Electromagnetic compatibility (EMC) |
EN 61967-1 |
Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 1: General conditions and definitions (IEC 61967-1:2002) / Note: Endorsement notice |
prEN 62040-2 |
IEC 62040-2: Semiconductor converters - Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements |
prEN 62041 |
Draft IEC 62041: Power transformers, power supply units and similar - EMC requirements |
EN 62053-31 |
Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only) (IEC 62053-31:1998) |
EN 133000 |
Generic specification: Passive filter units for electromagnetic interference suppression |
EN 133100 |
Sectional specification: Passive filter units for electromagnetic interference suppression - Filters for which safety tests are not required |
EN 133101 |
Blank detail specification: Passive filter units for electromagnetic interference suppression - Filters for which safety tests are not required |
EN 133200 |
Sectional specification: Passive filter units for electromagnetic interference suppression (Filters for which safety tests are required) |
EN 138121 |
Blank detail specification: Fixed inductors for electromagnetic interference suppression - Inductors for which safety tests are required (safety tests only) |
EN 300152 V 1.2.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Maritime Emergency Position Indicating Radio Beacons (EPIRBs) intended for use on the frequency 121,5 MHz, or the frequencies 121,5 MHz and 243 MHz for homing purposes only - Technical char |
EN 300220-1 V 1.2.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short range devices - Technical characteristics and test methods for radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW - Part 1: Pa |
EN 300220-2 V 1.2.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short range devices - Technical characteristics and test methods for radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mW - Part 2: Su |
EN 300279 V 1.2.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) standard for Private land Mobile Radio (PMR) and ancillary equipment (speech and/or non-speech) |
EN 300330 V 1.2.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Short Range Devices (SRD) - Technical characteristics and test methods for radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to |
EN 300339 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - General Electromagnetic Compatibility (EMC) for radio communications equipment |
EN 300386-2 V 1.1.3 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Telecommunication network equipment - Electromagnetic Compatibility (EMC) requirements - Part 2: Product family standard |
EN 300422 V 1.2.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Technical characteristics and test methods for wireless microphones in the 25 MHz to 3 GHz frequency range |
EN 300674 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Road Transport and Traffic Telematics (RTTT) - Technical characteristics and test methods for data transmission equipment operating in the 5,8 GHz Industrial, Scientific and Medical (ISM) b |
EN 300761 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Automatic Vehicle Identification (AVI) for railways |
EN 300789 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Terrestrial Flight Telecommunications System (TFTS) - Avionic termination radio testing specification |
EN 300793 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land mobile service - Presentation of equipment for type testing |
EN 300827 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) standard for Terrestrial Trunked Radio (TETRA) and ancillary equipment |
EN 300828 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) for radiotelephone transmitters and receivers for the maritime mobile service operating in the VHF bands |
EN 300829 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) for Maritime Mobile Earth Stations (MMES) operating in the 1,5/1,6 GHz bands providing Low Bit Rate Data Communications (LBRDC) for the Global Maritime D |
EN 300830 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz bands providing data communications |
EN 300831 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) for Mobile Earth Stations (MES) used within Satellite Personal Communications Networks (S-PCN) operating in the 1,6/2,4 GHz and 2 GHz frequency bands |
EN 300832 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) for Mobile Earth Stations (MES) providing Low Bit Rate Data Communications (LBRDC) using satellites in Low Earth Orbits (LEO) operating in frequency band |
EN 301011 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) standard for Narrow-Band Direct-Printing (NBDP) NAVTEX receivers operating in the maritime mobile service |
EN 301025 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Technical characteristics and methods of measurement for VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC) |
EN 301033 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Technical characteristics and methods of measurement for shipborne watchkeeping receivers for reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands |
EN 301090 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Electromagnetic Compatibility (EMC) standard for maritime radiotelephone watch receivers operating on 2182 kHz |
EN 301091 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Road Transport and Traffic Telematics (RTTT) - Technical characteristics and test methods for radar equipment operating in the 76 GHz to 77 GHz band |
EN 301166 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Land mobile service - Technical characteristics and test conditions for radio equipment for analogue and/or digital communication (speech and/or data) and operating on narrowband channels a |
EN 301178 V 1.1.1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Technical characteristics and methods of measurement for portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile service operating in the VHF bands (for non-GMDS |
EN 301357 V 1.1.1. |
Electromagnetic compatibility and Radio spectrum Matters (ERM) - Technical characteristics and test methods for analogue cordless wideband audio devices using integral antennas operating in the CEPT recommended 863 MHz to 865 MHz frequency range |
CLC/R OBT-001*ETR 238 |
CENELEC/ETSI standardization programme for the development of harmonized standards related to Electro-Magnetic Compatibility (EMC) in the field of telecommunications |
CLC/R OBT-001 Addendum 1*ETR 238 |
CENELEC/ETSI standardization programme for the development of harmonized standards related to Electro-Magnetic Compatibility (EMC) in the field of telecommunications; Addendum 1 |
CLC/R OBT-004 |
EC Directives, functional safety and the role of CENELEC standardization |
EN ISO 11608-1 |
Pen-injectors for medical use - Part 1: Pen-injectors; Requirements and test methods (ISO 11608-1:2000) |
EN ISO 14982 |
Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
HD 639 S1 |
Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) (IEC 61540:1997 + A1:1998, modified) |
HD 639 S1/prA1 |
Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) |
IEC Guide 107*CEI Guide 107 |
Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications |
IEC 2/1019/CDV*CEI 2/1019/CDV*IEC 60034-1*CEI 60034-1*IEC-PN 2/60034-1/f2*CEI-PN |
Amendment to IEC 60034-1: Rotating electrical machines - Part 1: Rating and performance; Clause 12: Electromagnetic compatibility (EMC) |
IEC 9/720/FDIS*CEI 9/720/FDIS*IEC 62236-1*CEI 62236-1*IEC-PN 9/62236-1*CEI-PN 9/ |
IEC 62236-1: Railway applications - Electromagnetic compatibility - Part 1: General |
IEC 9/729/FDIS*CEI 9/729/FDIS*IEC 62236-1*CEI 62236-1*IEC-PN 9/62236-1*CEI-PN 9/ |
IEC 62236-1: Railway applications - Electromagnetic compatibility - Part 1: General |
IEC 9/730/FDIS*CEI 9/730/FDIS*IEC 62236-2*CEI 62236-2*IEC-PN 9/62236-2*CEI-PN 9/ |
IEC 62236-2: Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world |
IEC 9/731/FDIS*CEI 9/731/FDIS*IEC 62236-3-1*CEI 62236-3-1*IEC-PN 9/62236-3-1*CEI |
IEC 62236-3-1: Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock; Train and complete vehicle |
IEC 9/732/FDIS*CEI 9/732/FDIS*IEC 62236-3-2*CEI 62236-3-2*IEC-PN 9/62236-3-2*CEI |
IEC 62236-3-2: Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock; Apparatus |
IEC 9/733/FDIS*CEI 9/733/FDIS*IEC 62236-4*CEI 62236-4*IEC-PN 9/62236-4*CEI-PN 9/ |
IEC 62236-4: Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
IEC 9/734/FDIS*CEI 9/734/FDIS*IEC 62236-5*CEI 62236-5*IEC-PN 9/62236-5*CEI-PN 9/ |
IEC 62236-5: Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus |
IEC 17B/1177/CDV*CEI 17B/1177/CDV*IEC 60947-2 AMD 3*CEI 60947-2 AMD 3*IEC-PN 17B |
Amendment 3 to IEC 60947-2, Ed. 2: Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
IEC 17B/1191/CDV*CEI 17B/1191/CDV*IEC 60947-8*CEI 60947-8*IEC-PN 17B/60947-8*CEI |
IEC 60947-8, Ed. 1: Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection for rotating electrical machines |
IEC 17B/1235/CDV*CEI 17B/1235/CDV*IEC 60947-5-1 AMD 3*CEI 60947-5-1 AMD 3*IEC-PN |
Amendment 3 to IEC 60947-5-1 (1997-10) |
IEC 17D/257/CDV*CEI 17D/257/CDV*IEC 60439-1 AMD 1*CEI 60439-1 AMD 1*IEC-PN 17D/6 |
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
IEC 22G/21/CDV*CEI 22G/21/CDV*IEC 61802*CEI 61802*IEC-PN 22G/1802*CEI-PN 22G/180 |
EMC product standard including specific test methods for power drive systems |
IEC 22G/106/CDV*CEI 22G/106/CDV*IEC 61800-3*CEI 61800-3*IEC-PN 22G/61800-3*CEI-P |
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
IEC 23/285/CDV*CEI 23/285/CDV*IEC 61867*CEI 61867*IEC-PN 23/61867*CEI-PN 23/6186 |
IEC 61867, Ed. 1: Electrical accessories for household and similar uses - Electromagnetic compatibility (EMC) |
IEC 23E/335/CDV*CEI 23E/335/CDV*IEC 61543 AMD 1*CEI 61543 AMD 1*IEC-PN 23E/61543 |
Draft Amendment 1 to IEC 61543: Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility of RCDs |
IEC 23E/456/FDIS*CEI 23E/456/FDIS*IEC 61008-1 AMD 1*CEI 61008-1 AMD 1*IEC-PN 23E |
Draft amendment 1 to IEC 61008-1, Ed. 2 |
IEC 23E/457/FDIS*CEI 23E/457/FDIS*IEC 61009-1 AMD 1*CEI 61009-1 AMD 1*IEC-PN 23E |
Draft amendment 1 to IEC 61009-1, Ed. 2 |
IEC 23E/474/FDIS*CEI 23E/474/FDIS*IEC 61543 AMD 1*CEI 61543 AMD 1*IEC-PN 23E/615 |
Draft amendment 1 to IEC 61543, Ed. 1 |
IEC 29/500/CDV*CEI 29/500/CDV*IEC 60118-13*CEI 60118-13*IEC-PN 29/60118-13*CEI-P |
IEC 60118-13: Hearing aids - Part 13: Electromagnetic compatibility (EMC); Product standard |
IEC 48D/273/CDV*CEI 48D/273/CDV*IEC 60297-3-101*CEI 60297-3-101*IEC-PN 48D/60297 |
IEC 60297-3-101: Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units |
IEC 48D/274/CDV*CEI 48D/274/CDV*IEC 60297-3-102*CEI 60297-3-102*IEC-PN 48D/60297 |
IEC 60297-3-102: Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-102: Injector/extractor handle |
IEC 48D/275/CDV*CEI 48D/275/CDV*IEC 60297-3-103*CEI 60297-3-103*IEC-PN 48D/60297 |
IEC 60297-3-103: Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-103: Keying and alignment pin |
IEC 62A/389/CDV*CEI 62A/389/CDV*IEC 60601-1*CEI 60601-1*IEC-PN 62A/60601-1*CEI-P |
IEC 60601-1, Ed. 3: Medical electrical equipment - Part 1: General requirements for safety and essential performance |
IEC 65A/213/CDV*CEI 65A/213/CDV*IEC 61326-20*CEI 61326-20*IEC-PN 65A/1326-20*CEI |
EMC requirements for electrical equipment for measurement, control and laboratory use - Part 20: Particular requirements for equipment used in laboratories or test and measurement areas with a controlled electromagnetic environment |
IEC 65A/214/CDV*CEI 65A/214/CDV*IEC 61326-30*CEI 61326-30*IEC-PN 65A/1326-30*CEI |
EMC requirements for electrical equipment for measurement, control and laboratory use - Part 30: Particular requirements for portable test and measurement equipment that is powered by battery or from the circuit being measured |
IEC 65A/323/CDV*CEI 65A/323/CDV*IEC 61326*CEI 61326*IEC-PN 65A/61326/F1*CEI-PN 6 |
IEC 61326-F1, Annex F: Test configurations, operational conditions and performance criteria for transducers with integrated or remote signal conditioning |
IEC 72/536/CDV*CEI 72/536/CDV*IEC 60730-1 AMD 1*CEI 60730-1 AMD 1*IEC-PN 72/6073 |
Amendment 1 to IEC 60730-1, Ed. 3: Automatic electrical controls for household and similar use - Part 1: General requirements |
IEC 72/559/CDV*CEI 72/559/CDV*IEC 60730-2-9 AMD 2*CEI 60730-2-9 AMD 2*IEC-PN 72/ |
Amendment 2 to IEC 60730-2-9, Ed. 2: Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
IEC 77A/147/CDV*CEI 77A/147/CDV*IEC 61000-4-13*CEI 61000-4-13*IEC-PN 1000-4-13*C |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 13: Test for immunity to harmonics and interharmonics including mains signalling at a.c. power port - Basic EMC publication |
IEC 77A/174/CDV*CEI 77A/174/CDV*IEC 61000-2-12*CEI 61000-2-12*IEC-PN 77A/1000-2- |
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 12: Compatibility levels for low-frequency conducted disturbances and signalling in public medium voltage power supply systems - Basic EMC publication |
IEC 77A/261/CDV*CEI 77A/261/CDV*IEC 61000-3-2 AMD 4*CEI 61000-3-2 AMD 4*IEC-PN 7 |
Amendment related to professional IT equipment to IEC 61000-3-2:1995 |
IEC 77A/262/CDV*CEI 77A/262/CDV*IEC 61000-3-2 AMD 3*CEI 61000-3-2 AMD 3*IEC-PN 7 |
Amendment related to subclause 6.1 and to professional equipment <kleiner> 1 kW to IEC 61000-3-2:1995 |
IEC 77A/374/CDV*CEI 77A/374/CDV*IEC 61000-2-12*CEI 61000-2-12*IEC-PN 77A/61000-2 |
IEC 61000-2-12, Ed. 1: Electromagnetic Compatibility (EMC) - Part 2-12 : Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public medium-voltage power supply systems; Basic EMC-Publication |
IEC 77A/389/FDIS*CEI 77A/389/FDIS*IEC 61000-4-15 AMD 1*CEI 61000-4-15 AMD 1*IEC- |
Amendment 1 to IEC 61000-4-15: Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques; Flickermeter; Functional and design specifications |
IEC 77A/398/FDIS*CEI 77A/398/FDIS*IEC 61000-4-30*CEI 61000-4-30*IEC-PN 77A/61000 |
IEC 61000-4-30, Ed. 1: Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques; Power quality measurement methods |
IEC 77B/273/CDV*CEI 77B/273/CDV*IEC 61000-4-3 AMD 3*CEI 61000-4-3 AMD 3*IEC-PN 7 |
Amendment to IEC 61000-4-3: Annex J: Alternative procedure - Reverberation chamber method; Annex K: Overview to reverberation chambers |
IEC 77B/295/CDV*CEI 77B/295/CDV*IEC 61000-4-3 AMD 2*CEI 61000-4-3 AMD 2*IEC-PN 7 |
Amendment to IEC 61000-4-3: Annex D: Other test methods - TEM cells and striplines |
IEC 77B/345/CDV*CEI 77B/345/CDV*IEC 61000-4-6*CEI 61000-4-6*IEC-PN 77B/61000-4-6 |
IEC 61000-4-6, Ed. 2: Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques; Immunity to conducted disturbances, induced by radiofrequency fields |
IEC 77C/135/FDIS*CEI 77C/135/FDIS*IEC 61000-6-6*CEI 61000-6-6*IEC-PN 77C/61000-6 |
IEC 61000-6-6, Ed. 1: Electromagnetic compatibility (EMC) - Part 6-6: Generic standards; HEMP immunity for indoor equipment |
IEC 95/146/CDV*CEI 95/146/CDV*IEC 60255-26*CEI 60255-26*IEC-PN 95/60255-26*CEI-P |
IEC 60255-26: Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements for measuring relays and protection equipment |
IEC 96/129/CDV*CEI 96/129/CDV*IEC 62041*CEI 62041*IEC-PN 96/62041*CEI-PN 96/6204 |
Draft IEC 62041: Power transformers, power supply units and similar - EMC requirements |
IEC 60050-161*CEI 60050-161 |
International electrotechnical vocabulary; chapter 161: electromagnetic compatibility |
IEC 60050-161 AMD 1*CEI 60050-161 AMD 1 |
International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility; Amendment 1 |
IEC 60050-161 AMD 2*CEI 60050-161 AMD 2 |
International Electrotechnical Vocabulary - Chapter 161: Electromagnetic compatibility; Amendment 2 |
IEC 60076-1 AMD 1*CEI 60076-1 AMD 1 |
Power transformers - Part 1: General; Amendment 1 |
IEC 60118-13*CEI 60118-13 |
Hearing aids - Part 13: Electromagnetic compatibility (EMC) |
IEC 60146-2*CEI 60146-2 |
Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters |
IEC 60255-25*CEI 60255-25 |
Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment |
IEC 60269-1*CEI 60269-1 |
Low-voltage fuses - Part 1: General requirements |
IEC 60297-5-100*CEI 60297-5-100 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-100: Subracks and associated plug-in units; Design overview |
IEC 60297-5-101*CEI 60297-5-101 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-101: Subracks and associated plug-in units; Injector/extractor handle |
IEC 60297-5-102*CEI 60297-5-102 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-102: Subracks and associated plug-in units; Electromagnetic shielding provision |
IEC 60297-5-103*CEI 60297-5-103 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-103: Subracks and associated plug-in units; Electrostatic discharge protection |
IEC 60297-5-104*CEI 60297-5-104 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-104: Subracks and associated plug-in units; Keying |
IEC 60297-5-105*CEI 60297-5-105 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-105: Subracks and associated plug-in units; Alignment and/or earth pin |
IEC 60297-5-107*CEI 60297-5-107 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 5-107: Subracks and associated plug-in units; Rear-mounted plug-in units |
IEC 60384-14*CEI 60384-14*QC 302400 |
Fixed capacitors for use in electronic equipment; part 14: sectional specification: fixed capacitors for electromagnetic interference suppression and connection to the supply mains |
IEC 60384-14-1*CEI 60384-14-1*QC 302401 |
Fixed capacitors for use in electronic equipment; part 14: blank detail specification: fixed capacitors for electromagnetic interference suppression and connection to the supply mains; assessment level D |
IEC 60494-2*CEI 60494-2 |
Railway applications - Rolling stock; Pantographs; Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
IEC 60495*CEI 60495 |
Single sideband power-line carrier terminals |
IEC 60533*CEI 60533 |
Electrical and electronic installations in ships - Electromagnetic compatibility |
IEC 60601-1*CEI 60601-1 |
Medical electrical equipment; part 1: general requirements for safety |
IEC 60601-1 AMD 1*CEI 60601-1 AMD 1 |
Medical electrical equipment; part 1: general requirements for safety; amendment 1 |
IEC 60601-1 AMD 2*CEI 60601-1 AMD 2 |
Medical electrical equipment - Part 1: General requirements for safety; Amendment 2 |
IEC 60601-1-2*CEI 60601-1-2 |
Medical electrical equipment - Part 1-2: General requirements for safety; Collateral standard: Electromagnetic compatibility; Requirements and tests |
IEC 60601-2-18*CEI 60601-2-18 |
Medical electrical equipment - Part 2: Particular requirements for the safety of endoscopic equipment |
IEC 60601-2-18 AMD 1*CEI 60601-2-18 AMD 1 |
Medical electrical equipment - Part 2-18: Particular requirements for the safety of endoscopic equipment; Amendment 1 |
IEC 60601-2-24*CEI 60601-2-24 |
Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusion pumps and controllers |
IEC 60601-2-29*CEI 60601-2-29 |
Medical electrical equipment - Part 2-29: Particular requirements for the safety of radiotherapy simulators |
IEC 60601-2-31*CEI 60601-2-31 |
Medical electrical equipment - Part 2: Particular requirements for the safety of external cardiac pacemakers with internal power source |
IEC 60601-2-35*CEI 60601-2-35 |
Medical electrical equipment - Part 2: Particular requirements for the safety of blankets, pads and mattresses, intended for heating in medical use |
IEC 60601-2-40*CEI 60601-2-40 |
Medical electrical equipment - Part 2-40: Particular requirements for the safety of electromyographs and evoked response equipment |
IEC 60651*CEI 60651 |
Sound level meters / Note: This document and its separate amendments continue to be valid together with the consolidated version |
IEC 60651 AMD 1*CEI 60651 AMD 1 |
Sound level meters; amendment 1 |
IEC 60651 AMD 2*CEI 60651 AMD 2 |
Sound level meters; Amendment 2 |
IEC 60651 Edition 1.2*CEI 60651 Edition 1.2 |
Sound level meters / Note: Combines IEC 60651 (1979), AMD 1 (1993-09) and AMD 2 (2000-10) |
IEC 60694*CEI 60694 |
Common specification high-voltage switchgear and controlgear standards / Note: This document and its separate amendments continue to be valid together with the consolidated version |
IEC 60694 AMD 1*CEI 60694 AMD 1 |
Common specifications for high-voltage switchgear and controlgear standards; Amendment 1 |
IEC 60694 AMD 2*CEI 60694 AMD 2 |
Common specifications for high-voltage switchgear and controlgear standards; Amendment 2 / Note: Includes Amendment/Corrigendum of december 2001 |
IEC 60694 Edition 2.2*CEI 60694 Edition 2.2 |
Common specifications for high-voltage switchgear and controlgear standards / Note: Combines IEC 60694 (1996-05) AMD 1 (2000-09) and AMD 2 (2001-07) |
IEC/TR3 60725*CEI/TR3 60725 |
Considerations on reference impedances for use in determining the disturbance characteristics of household appliances and similar electrical equipment |
IEC 60728-2*CEI 60728-2 |
Cabled distribution systems for television and sound signals - Part 2: Electromagnetic compatibility for equipment |
IEC 60728-12*CEI 60728-12 |
Cabled distribution systems for television and sound signals - Part 12: Electromagnetic compatibility of systems |
IEC 60730-2-9 AMD 1*CEI 60730-2-9 AMD 1 |
Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls; Amendment 1 |
IEC 60731 AMD 1*CEI 60731 AMD 1 |
Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy; Amendment 1 |
IEC/TR2 60816*CEI/TR2 60816 |
Guide on methods of measurement of short duration transients on low voltage power and signal lines. |
IEC 60831-1*CEI 60831-1 |
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General - Performance, testing and rating - Safety requirements - Guide for installation and operation |
IEC 60831-1 AMD 1*CEI 60831-1 AMD 1 |
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V - Part 1: General; Performance, testing and rating; Safety requirements; Guide for installation and operation; Amendment 1 |
IEC 60831-1 Edition 2.1*CEI 60831-1 Edition 2.1 |
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 1: General; Performance, testing and rating; Safety requirements; Guide for installation and operation / Note: Combines IEC 60831-1 |
IEC/TR2 60868*CEI/TR2 60868 |
Flickermeter. Functional and design specifications |
IEC/TR2 60868 AMD 1*CEI/TR2 60868 AMD 1 |
Flickermeter; functional and design specifications; amendment 1 to IEC 60868:1986 |
IEC 60870-2-1*CEI 60870-2-1 |
Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility |
IEC 60938-1*CEI 60938-1*QC 280000 |
Fixed inductors for electromagnetic interference suppression - Part 1: Generic specification |
IEC 60938-2*CEI 60938-2*QC 280100 |
Fixed inductors for electromagnetic interference suppression - Part 2: Sectional specification |
IEC 60938-2-1*CEI 60938-2-1*QC 280101 |
Fixed inductors for electromagnetic interference suppression - Part 2-1: Blank detail specification - Inductors for which safety tests are required - Assessment level D |
IEC 60938-2-2*CEI 60938-2-2*QC 280102 |
Fixed inductors for electromagnetic interference suppression - Part 2-2: Blank detail specification - Inductors for which safety tests are required (only) |
IEC 60947-1*CEI 60947-1 |
Low-voltage switchgear and controlgear - Part 1: General rules / Note: This document and its separate amendments continue to be valid together with the consolidated version |
IEC 60947-1 AMD 1*CEI 60947-1 AMD 1 |
Low-voltage switchgear and controlgear - Part 1: General rules; Amendment 1 |
IEC 60947-1 AMD 2*CEI 60947-1 AMD 2 |
Low-voltage switchgear and controlgear - Part 1: General rules; Amendment 2 |
IEC 60947-2*CEI 60947-2 |
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers / Note: This document and its separate amendments continue to be valid together with the consolidated version |
IEC 60947-2 AMD 1*CEI 60947-2 AMD 1 |
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers; Amendment 1 |
IEC 60947-2 AMD 2*CEI 60947-2 AMD 2 |
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers; Amendment 2 |
IEC 60947-3*CEI 60947-3 |
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units / Note: This document and its separate amendments continue to be valid together with the consolidated version |
IEC 60947-3 AMD 1*CEI 60947-3 AMD 1 |
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units; Amendment 1 |
IEC 60947-4-3*CEI 60947-4-3 |
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
IEC 60947-5-1*CEI 60947-5-1 |
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
IEC 60947-5-1 AMD 1*CEI 60947-5-1 AMD 1 |
Low-voltage switchgear and controlgear - Part 5: Control circuit devices and switching elements - Section 1: Electromechanical control circuit devices; Amendment 1 |
IEC 60947-5-1 AMD 2*CEI 60947-5-1 AMD 2 |
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices; Amendment 2 |
IEC 60947-5-2 AMD 1*CEI 60947-5-2 AMD 1 |
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches; Amendment 1 |
IEC 60947-6-1 AMD 2*CEI 60947-6-1 AMD 2 |
Low-voltage switchgear and controlgear - Part 6: Multiple function equipment - Section 1: Automatic transfer switching equipment; Amendment 2 |
IEC 60974-10*CEI 60974-10 |
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements |
IEC/TR3 61000-1-1*CEI/TR3 61000-1-1 |
Electromagnetic compatibility (EMC); part 1: general; section 1: application and interpretation of fundamental definitions and terms |
IEC/TS 61000-1-2*CEI/TS 61000-1-2 |
Electromagnetic Compatibility (EMC) - Part 1-2: General - Methodology for the achievement of the functional safety of electrical and electronic equipment with regard to electromagnetic phenomena |
IEC/TR 61000-1-3*CEI/TR 61000-1-3 |
Electromagnetic compatibility (EMC) - Part 1-3: General; The effects of high-altitude EMP (HEMP) on civil equipment and systems |
IEC/TR3 61000-2-1*CEI/TR3 61000-2-1 |
Electromagnetic compatibility (EMC); part 2: environment; section 1: description of the environment; electromagnetic environment for low-frequency conducted disturbances and signalling in public power supply systems |
IEC 61000-2-2*CEI 61000-2-2 |
Electromagnetic compatibility (EMC) - Part 2-2: Environment; Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
IEC/TR3 61000-2-3*CEI/TR3 61000-2-3 |
Electromagnetic compatibility (EMC); part 2: environment; section 3: description of the environment; radiated and non-network-frequency-related conducted phenomena |
IEC 61000-2-4*CEI 61000-2-4 |
Electromagnetic compatibility (EMC) - Part 2-4: Environment; Compatibility levels in industrial plants for low-frequency conducted disturbances |
IEC/TR2 61000-2-5*CEI/TR2 61000-2-5 |
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 5: Classification of electromagnetic environments; Basic EMC publication |
IEC/TR3 61000-2-6*CEI/TR3 61000-2-6 |
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the emission levels in the power supply of industrial plants as regards low-frequency conducted disturbances |
IEC/TR 61000-2-7*CEI/TR 61000-2-7 |
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 7: Low frequency magnetic fields in various environments |
IEC/TR 61000-2-8*CEI/TR 61000-2-8 |
Electromagnetic compatibility (EMC) - Part 2-8: Environment; Voltage dips and short interruptions on public electric power supply systems with statistical measurement results |
IEC 61000-2-9*CEI 61000-2-9 |
Electromagnetic compatibility (EMC) - Part 2: Environment - Section 9: Description of HEMP environment - Radiated disturbance - Basic EMC publication |
IEC 61000-2-10*CEI 61000-2-10 |
Electromagnetic compatibility (EMC) - Part 2-10: Environment - Description of HEMP environment - Conducted disturbance |
IEC 61000-2-11*CEI 61000-2-11 |
Electromagnetic compatibility (EMC) - Part 2-11: Environment - Classification of HEMP environments |
IEC 61000-3-2*CEI 61000-3-2 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions (equipment input current <kleiner =>16 A per phase) / Note: This document and its separate amendments continue to be valid together with the consolidated version |
IEC 61000-3-2 AMD 1*CEI 61000-3-2 AMD 1 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions (equipment input current <kleiner =>16 A per phase); Amendment 1 |
IEC 61000-3-2 Edition 2.1*CEI 61000-3-2 Edition 2.1 |
Electromagnetic compatibility (EMC) - Part 3-2: Limits; Limits for harmonic current emissions (equipment input current <kleiner =>16 A per phase) / Note: Combines IEC 61000-3-2 (2000-08) and AMD 1 (2001-08) |
IEC 61000-3-3*CEI 61000-3-3 |
Electromagnetic compatibility (EMC) - Part 3: Limits; section 3: Limitation of voltage fluctuations and flicker in low-voltage supply systems for equipment with rated current <kleiner =>16 A |
IEC 61000-3-3 AMD 1*CEI 61000-3-3 AMD 1 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits; Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <kleiner => 16 A per phase and not subject to conditional |
IEC 61000-3-3 Edition 1.1*CEI 61000-3-3 Edition 1.1 |
Electromagnetic compatibility (EMC) - Part 3-3: Limits; Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <kleiner => 16 A per phase and not subject to conditional |
IEC/TR2 61000-3-4*CEI/TR2 61000-3-4 |
Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A |
IEC/TR2 61000-3-5*CEI/TR2 61000-3-5 |
Electromagnetic compatibility (EMC) - Part 3: Limits; section 5: Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 16 A |
IEC/TR3 61000-3-6*CEI/TR3 61000-3-6 |
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 6: Assessment of emission limits for distorting loads in MV and HV power systems - Basic EMC publication |
IEC/TR3 61000-3-7*CEI/TR3 61000-3-7 |
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 7: Assessment of emission limits for fluctuating loads in MV and HV power systems - Basic EMC publication |
IEC 61000-3-8*CEI 61000-3-8 |
Electromagnetic compatibility (EMC) - Part 3: Limits - Section 8: Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels |
IEC 61000-3-11*CEI 61000-3-11 |
Electromagnetic compatibility (EMC) - Part 3-11: Limits; Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems; Equipment with rated current <kleiner =>75 A and subject to conditional connection |
IEC 61000-4-1*CEI 61000-4-1 |
Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series |
IEC 61000-4-2*CEI 61000-4-2 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 2: Electrostatic discharge immunity test - Basic EMC publication |
IEC 61000-4-2 AMD 1*CEI 61000-4-2 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measuring techniques - Electrostatic discharge immunity test; Amendment 1 |
IEC 61000-4-2 AMD 2*CEI 61000-4-2 AMD 2 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques; Electrostatic discharge immunity test; Amendment 2 |
IEC 61000-4-2 Edition 1.2*CEI 61000-4-2 Edition 1.2 |
Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques; Electrostatic discharge immunity test / Note: Combines IEC 61000-4-2 (1995-01), AMD 1 (1998-01) and AMD 2 (2000-11) |
IEC 61000-4-3*CEI 61000-4-3 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques; Radiated, radio-frequency, electromagnetic field immunity test / Note: This document and its separate amendments continue to be valid together with the consolidated version |
IEC 61000-4-3 AMD 1*CEI 61000-4-3 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques; Radiated, radio-frequency, electromagnetic field immunity test; Amendment 1 |
IEC 61000-4-3 Edition 2.1*CEI 61000-4-3 Edition 2.1 |
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques; Radiated, radio-frequency, electromagnetic field immunity test / Note: Combines IEC 61000-4-3 (2002-03) and AMD 1 (2002-08) |
IEC 61000-4-4*CEI 61000-4-4 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 4: Electrical fast transient/burst immunity test - Basic EMC publication |
IEC 61000-4-4 AMD 1*CEI 61000-4-4 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques; Electrical fast transient/burst immunity test; Amendment 1 |
IEC 61000-4-4 AMD 2*CEI 61000-4-4 AMD 2 |
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques; Electrical fast transient/burst immunity test; Amendment 2 |
IEC 61000-4-5*CEI 61000-4-5 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 5: Surge immunity test |
IEC 61000-4-5 AMD 1*CEI 61000-4-5 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques; Surge immunity test; Amendment 1 |
IEC 61000-4-5 Edition 1.1*CEI 61000-4-5 Edition 1.1 |
Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques; Surge immunity test / Note: Combines IEC 61000-4-5 (1995-02) and AMD 1 (2000-11) |
IEC 61000-4-6*CEI 61000-4-6 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 6: Immunity to conducted disturbances, induced by radio-frequency fields |
IEC 61000-4-6 AMD 1*CEI 61000-4-6 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques; Immunity to conducted disturbances, induced by radio-frequency fields; Amendment 1 |
IEC 61000-4-6 Edition 1.1*CEI 61000-4-6 Edition 1.1 |
Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques; Immunity to conducted disturbances, induced by radio-frequency fields / Note: Combines IEC 61000-4-6 (1996-03) and AMD 1 (2000-11) |
IEC 61000-4-7*CEI 61000-4-7 |
Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques; General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
IEC 61000-4-8*CEI 61000-4-8 |
Electromagnetic compatibility (EMC); part 4: testing and measurement techniques; section 8: power frequency magnetic field immunity test; basic EMC publication |
IEC 61000-4-8 AMD 1*CEI 61000-4-8 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques; Power frequency magnetic field immunity test; Amendment 1 |
IEC 61000-4-8 Edition 1.1*CEI 61000-4-8 Edition 1.1 |
Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques; Power frequency magnetic field immunity test |
IEC 61000-4-9*CEI 61000-4-9 |
Electromagnetic compatibility (EMC); part 4: testing and measurement techniques; section 9: pulse magnetic field immunity test; basic EMC publication |
IEC 61000-4-9 AMD 1*CEI 61000-4-9 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques; Pulse magnetic field immunity test; Amendment 1 |
IEC 61000-4-9 Edition 1.1*CEI 61000-4-9 Edition 1.1 |
Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques; Pulse magnetic field immunity test |
IEC 61000-4-10*CEI 61000-4-10 |
Electromagnetic compatibility (EMC); part 4: testing and measurement techniques; section 10: damped oscillatory magnetic field immunity test; basic EMC publication |
IEC 61000-4-10 AMD 1*CEI 61000-4-10 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques; Damped oscillatory magnetic field immunity test; Amendment 1 |
IEC 61000-4-10 Edition 1.1*CEI 61000-4-10 Edition 1.1 |
Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques; Damped oscillatory magnetic field immunity test |
IEC 61000-4-11*CEI 61000-4-11 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 11: Voltage dips, short interruptions and voltage variations immunity tests |
IEC 61000-4-11 AMD 1*CEI 61000-4-11 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations immunity tests; Amendment 1 |
IEC 61000-4-11 Edition 1.1*CEI 61000-4-11 Edition 1.1 |
Electromagnetic compatibility (EMC) - Part 4-11: Testing and measuring techniques; Voltage dips, short interruptions and voltage variations immunity tests |
IEC 61000-4-12*CEI 61000-4-12 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measuring techniques - Section 12: Oscillatory waves immunity test; basic EMC publication |
IEC 61000-4-12 AMD 1*CEI 61000-4-12 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-12: Testing and measurement techniques; Oscillatory waves immunity test; Amendment 1 |
IEC 61000-4-12 Edition 1.1*CEI 61000-4-12 Edition 1.1 |
Electromagnetic compatibility (EMC) - Part 4-12: Testing and measuring techniques; Oscillatory waves immunity test / Note: Combines IEC 61000-4-12 (1995-05) und AMD 1 (2000-11) |
IEC 61000-4-13*CEI 61000-4-13 |
Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques; Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests |
IEC 61000-4-14*CEI 61000-4-14 |
Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques - Voltage fluctuation immunity test / Note: This document and its separate amendments continue to be valid together with the consolidated version |
IEC 61000-4-14 AMD 1*CEI 61000-4-14 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques; Voltage fluctuation immunity test; Amendment 1 |
IEC 61000-4-14 Edition 1.1*CEI 61000-4-14 Edition 1.1 |
Electromagnetic compatibility (EMC) - Part 4-14: Testing and measurement techniques; Voltage fluctuation immunity test / Note: Combines IEC 61000-4-14 Edition 1 (1999-02) and AMD 1 (2001-07) |
IEC 61000-4-15*CEI 61000-4-15 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 15: Flickermeter - Functional and design specifications |
IEC 61000-4-16*CEI 61000-4-16 |
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kKz / Note: This document and its separate amendments continue to be valid t |
IEC 61000-4-16 AMD 1*CEI 61000-4-16 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques; Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz; Amendment 1 |
IEC 61000-4-16 Edition 1.1*CEI 61000-4-16 Edition 1.1 |
Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques; Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kKz / Note: Combines IEC 61000-4-16 Edition 1 (1998-01) and AMD 1 (2001-07) |
IEC 61000-4-17*CEI 61000-4-17 |
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques - Ripple on d.c. input power port, immunity test / Note: This document and its separate amendments continue to be valid together with the consolidated version |
IEC 61000-4-17 AMD 1*CEI 61000-4-17 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques; Ripple on d.c. input power port immunity test; Amendment 1 |
IEC 61000-4-17 Edition 1.1*CEI 61000-4-17 Edition 1.1 |
Electromagnetic compatibility (EMC) - Part 4-17: Testing and measuring techniques; Ripple on d.c. input power port immunity test / Note: Combines IEC 61000-4-17 Edition 1 (1999-06) and AMD 1 (2001-07) |
IEC 61000-4-23*CEI 61000-4-23 |
Electromagnetic compatibility (EMC) - Part 4-23: Testing and measurement techniques; Test methods for protective devices for HEMP and other radiated disturbances |
IEC 61000-4-24*CEI 61000-4-24 |
Electromagnetic compatibility (EMC) - Part 4: Testing and measurement techniques - Section 24: Test methods for protective devices for HEMP conducted disturbance - Basic EMC publication |
IEC 61000-4-25*CEI 61000-4-25 |
Electromagnetic compatibility (EMC) - Part 4-25: Testing and measurement techniques; HEMP immunity test methods for equipment and systems |
IEC 61000-4-27*CEI 61000-4-27 |
Electromagnetic compatibility (EMC) - Part 4-27: Testing and measurement techniques; Unbalance, immunity test |
IEC 61000-4-28*CEI 61000-4-28 |
Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test / Note: This document and its separate amendments continue to be valid together with the consolidated version |
IEC 61000-4-28 AMD 1*CEI 61000-4-28 AMD 1 |
Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques; Variation of power frequency, immunity test; Amendment 1 |
IEC 61000-4-28 Edition 1.1*CEI 61000-4-28 Edition 1.1 |
Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques; Variation of power frequency, immunity test / Note: Combines IEC 61000-4-28 Edition 1 (1999-11) and AMD 1 (2001-07) |
IEC 61000-4-29*CEI 61000-4-29 |
Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques; Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
IEC 61000-4-32*CEI 61000-4-32 |
Electromagnetic compatibility (EMC) - Part 4-32: Testing and measurement techniques; High-altitude electromagnetic impulse HEMP simulator compendium |
IEC/TR3 61000-5-1*CEI/TR3 61000-5-1 |
Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication |
IEC/TR3 61000-5-2*CEI/TR3 61000-5-2 |
Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling |
IEC/TR 61000-5-3*CEI/TR 61000-5-3 |
Electromagnetic compatibility (EMC) - Part 5-3: Installation and mitigation guidelines - HEMP protection concepts |
IEC/TR2 61000-5-4*CEI/TR2 61000-5-4 |
Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 4: Immunity to HEMP - Specifications of protective devices against HEMP radiated disturbance - Basic EMC publication |
IEC 61000-5-5*CEI 61000-5-5 |
Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 5: Specification of protective devices for HEMP conducted disturbance - Basic EMC publication |
IEC/TR 61000-5-6*CEI/TR 61000-5-6 |
Electromagnetic compatibility (EMC) - Part 5-6: Installation and mitigation guidelines; Mitigation of external EM influences |
IEC 61000-5-7*CEI 61000-5-7 |
Electromagnetic compatibility (EMC) - Part 5-7: Installation and mitigation guidelines; Degrees of protection provided by enclosures against electromagnetic disturbances (EM code) |
IEC 61000-6-1*CEI 61000-6-1 |
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 1: Immunity for residential, commercial and light-industrial environments |
IEC 61000-6-2*CEI 61000-6-2 |
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments |
IEC 61000-6-3*CEI 61000-6-3*CISPR/IEC 61000-6-3 |
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 3: Emission standard for residential, commercial and light-industrial environments |
IEC 61000-6-4*CEI 61000-6-4 |
Electromagnetic compatibility (EMC) - Part 6: Generic standards - Section 4: Emission standard for industrial environments |
IEC/TS 61000-6-5*CEI/TS 61000-6-5 |
Electromagnetic compatibility (EMC) - Part 6-5: Generic standards; Immunity for power station and substation environments |
IEC 61095*CEI 61095 |
Electromechanical contactors for household and similar purposes |
IEC 61095 AMD 1*CEI 61095 AMD 1 |
Electromechanical contactors for household and similar purposes |
IEC 61204-3*CEI 61204-3 |
Low-voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC) |
IEC 61260*CEI 61260 |
Electroacoustics - Octave-band and fractional-octave-band filters |
IEC 61260 AMD 1*CEI 61260 AMD 1 |
Electroacoustics - Octave-band and fractional-octave-band filters; Amendment 1 |
IEC 61312-1*CEI 61312-1 |
Protection against lightning electromagnetic impulse - Part 1: General principles |
IEC/TS 61312-2*CEI/TS 61312-2 |
Protection against lightning electromagnetic impulse (LEMP) - Part 2: Shielding of structures, bonding inside structures and earthing |
IEC/TS 61312-3*CEI/TS 61312-3 |
Protection against lightning electromagnetic impulse - Part 3: Requirements of surge protective devices (SPDs) |
IEC/TR2 61312-4*CEI/TR2 61312-4 |
Protection against lightning electromagnetic impulse - Part 4: Protection of equipment in existing structures |
IEC 61326*CEI 61326 |
Electrical equipment for measurement, control and laboratory use - EMC requirements |
IEC 61543*CEI 61543 |
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility |
IEC 61547*CEI 61547 |
Equipment for general lighting purposes - EMC immunity requirements |
IEC 61547 AMD 1*CEI 61547 AMD 1 |
Equipment for general lighting purposes - EMC immunity requirements; Amendment 1 |
IEC 61674 AMD 1*CEI 61674 AMD 1 |
Medical electrical equipment - Dosimeters with ionization chambers and/or semi-conductor detectors as used in X-ray diagnostic imaging; Amendment 1 |
IEC 61800-3*CEI 61800-3 |
Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods |
IEC/TR3 61917*CEI/TR3 61917 |
Cables, cable assemblies and connectors - Introduction to electromagnetic (EMC) screening measurements |
IEC 61967-1*CEI 61967-1 |
Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 1: General conditions and definitions |
IEC 62040-2*CEI 62040-2 |
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements |
IEC 62053-31*CEI 62053-31 |
Electricity metering equipment (a.c.) - Particular requirements - Part 31: Pulse output devices for electromechanical and electronic meters (two wires only) |
ISO/FDIS 7176-21 |
Wheelchairs - Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and motorized scooters |
ISO/DIS 7176-24 |
Wheelchairs - Part 24: Requirements and test methods for user-operated stair-climbing devices |
ISO 7637-1 |
Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations |
ISO 7637-3 |
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
ISO 7637-3 Technical Corrigendum 1 |
Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Vehicles with nominal 12 V and 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines; Technical Corrigend |
ISO/TR 11062 |
Manipulating industrial robots - EMC test methods and performance evaluation criteria - Guidelines |
ISO 11451-1 |
Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General and definitions |
ISO 11451-2 |
Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 2: Off-vehicle radiation source |
ISO 11451-3 |
Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Vehicle test methods - Part 3: On-board transmitter simulation |
ISO 11451-4 |
Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Vehicle test methods - Part 4: Bulk current injection (BCI) |
ISO 11452-1 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 1: General and definitions |
ISO 11452-2 |
Road vehicles - Electrical disturbances by narrowband radiated electromagnetic energy - Component test methods - Part 2: Absorber-lined chamber |
ISO 11452-3 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 3: Transverse electromagnetic (TEM) cell |
ISO 11452-4 |
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Bulk current injection (BCI) |
ISO 11452-5 |
Road vehicles - Component test methods for electrical disturbances by narrowband radiated electromagnetic energy - Part 5: Stripline |
ISO 11608-1 |
Pen-injectors for medical use - Part 1: Pen-injectors; Requirements and test methods |
ISO 13766 |
Earth-moving machinery - Electromagnetic compatibility |
ISO 14302 |
Space systems - Electromagnetic compatibility requirements |
ISO 14982 |
Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria |
ISO 15763 |
Road vehicles - Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t |
ITU-T K.32 |
Immunity requirements and test methods for electrostatic discharge to telecommunication equipment - Generic EMC recommendation |
ITU-T K.34 |
Classification of electromagnetic environmental conditions for telecommunication equipment - Basic EMC recommendation |
ITU-T K.35 |
Bonding configurations and earthing at remote electronic sites |
ITU-T K.37 |
Low and high frequency EMC mitigation techniques for telecommunication installations and systems - Basic EMC recommendation |
ITU-T K.40 |
Protection against LEMP in telecommunications centres |
ITU-T K.41 |
Resistibility of internal interfaces of telecommunication centres to surge overvoltages |
ITU-T K.42 |
Preparation of emission and immunity requirements for telecommunication equipment - General principles |
ITU-T K.43 |
Immunity requirements for telecommunication equipment |
ITU-T K.43 Corrigendum 1 |
Immunity requirements for telecommunication equipment; Corrigendum 1 |
ITU-T K.48 |
EMC requirements for each telecommunication network equipment - Product family recommendation |
ITU-T K.53 |
Values of induced voltages on telecommunication installations to establish telecom and a.c. power and railway operators responsibilities |
ITU-T K.54 |
Conducted immunity test method and level at fundamental power frequencies |
