The information contained in this summarised list is a compilation of the references of standards which have been published in the Official Journal of the European Communities, C 332 of 2001-11-27 and C141 of 2002-06-14. Although the list is updated regularly, it may not be complete and it does not have any legal validity; only publication in the Official Journal produces legal affect.
ESO ( 1 )
|
Reference
|
Title of the Harmonised Standards
|
First publication OJ ( 2 ) |
CEN |
EN 81-3:2000 |
Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts. |
27.11.2001 |
CEN |
EN 115:1995 |
Safety rules for the construction and installation of escalators and passenger conveyors. |
01.07.1995 |
CEN |
EN 115.A1:1998 |
Safety rules for the construction and installation of escalators and passenger conveyors - Amendment 1 |
15.10.1998 |
CEN |
EN 201:1997 |
Rubber and plastics machines - Injection moulding machines - Safety requirements |
04.06.1997 |
CEN |
EN 201.A1:2000 |
Rubber and plastics machines - Injection moulding machines - Safety requirements - Amendment 1 |
20.05.2000 |
CEN |
EN 280:2001 |
Mobile elevating work platforms - Design calculations, stability criteria, construction - Safety, examinations and tests |
14.06.2002 |
CEN |
EN 289:1993 |
Rubber and plastics machinery - Compression and transfer moulding presses - Safety requirements for the design |
27.07.1994 |
CEN |
EN 292-1:1991 |
Safety of machinery - Basic concepts, general principles for design - Part 1 : Basic terminology, methodology |
24.06.1992 |
CEN |
EN 292-2:1991 |
Safety of machinery - Basic concepts, general principles for design - Part 2 : Technical principles and specifications |
24.06.1992 |
CEN |
EN 292-2/A1:1995 |
Safety of machinery - Basic concepts, general principles for design - Part 2 : Technical principles and specifications - Amendment 1 |
14.02.1996 |
CEN |
EN 294:1992 |
Safety of machinery - Safety distance to prevent danger zones being reached by the upper limbs |
25.08.1993 |
CEN |
EN 349:1993 |
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
25.08.1993 |
CEN |
EN 415-1:2000 |
Safety of packaging machines - Part 1 : Terminology and classification of packaging machines and associated equipment |
14.06.2002 |
CEN |
EN 415-2:1999 |
Packaging machines Safety - Part 2: Pre-formed rigid container packaging machines |
20.05.2000 |
CEN |
EN 415-3:1999 |
Safety of packaging machines - Part 3: Form, fill and seal machines. |
27.11.2001 |
CEN |
EN 415-4:1997 |
Safety of packaging machines - Part 4: Palletisers and depalletisers |
04.06.1997 |
CEN |
EN 418:1992 |
Safety of machinery - Emergency stop equipment, functional aspects - Principles for design |
25.08.1993 |
CEN |
EN 422:1995 |
Rubber and plastics machines - Safety - Blow moulding machines intended for the production of hollow articles - Requirements for the design and construction |
08.08.1996 |
CEN |
EN 453:2000 |
Food processing machinery - Dough mixers - Safety and hygiene requirements. |
10.03.2001 |
CEN |
EN 454:2000 |
Food processing machinery - Planetary mixers - Safety and hygiene requirements. |
10.03.2001 |
CEN |
EN 457:1992 |
Safety of machinery - Auditory danger signals - General requirements, design and testing (ISO 7731:1986, modified) |
25.08.1993 |
CEN |
EN 474-1:1994 |
Earth-moving machinery - Safety - Part 1: General requirements |
31.12.1994 |
CEN |
EN 474-1/A1:1998 |
Earth-moving machinery - Safety - Part 1: General requirements - Amendment 1 |
15.10.1998 |
CEN |
EN 474-2:1996 |
Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers |
15.10.1996 |
CEN |
EN 474-3:1996 |
Earth-moving machinery - Safety - Part 3: Requirements for loaders |
15.10.1996 |
CEN |
EN 474-4:1996 |
Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders |
15.10.1996 |
CEN |
EN 474-5:1996 |
Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators |
15.10.1996 |
CEN |
EN 474-6:1996 |
Earth-moving machinery - Safety - Part 6: Requirements for dumpers |
15.10.1996 |
CEN |
EN 474-7:1998 |
Earth-moving machinery - Safety - Part 7: Requirements for scrapers |
15.10.1998 |
CEN |
EN 474-8:1998 |
Earth-moving machinery - Safety - Part 8: Requirements for graders |
15.10.1998 |
CEN |
EN 474-9:1998 |
Earth-moving machinery - Safety - Part 9: Requirements for pipelayers |
15.10.1998 |
CEN |
EN 474-10:1998 |
Earth-moving machinery - Safety - Part 10: Requirements for trenchers |
15.10.1998 |
CEN |
EN 474-11:1998 |
Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors |
15.10.1998 |
CEN |
EN 500-1:1995 |
Mobile road construction machinery - Safety - Part 1 : Common requirements |
14.02.1996 |
CEN |
EN 500-2:1995 |
Mobile road construction machinery - Safety - Part 2 : Specific requirements for road-milling machines |
14.02.1996 |
CEN |
EN 500-3:1995 |
Mobile road construction machinery - Safety - Part 3 : Specific requirements for soil stabilisation machines |
14.02.1996 |
CEN |
EN 500-4:1995 |
Mobile road construction machinery - Safety - Part 4 : Specific requirements for compaction machines |
14.02.1996 |
CEN |
EN 528:1996 |
Rail dependent storage and retrieval equipment - Safety |
28.11.1996 |
CEN |
EN 528/A1:2002 |
Rail dependent storage and retrieval equipment - Safety - Amendment 1 |
14.08.2003 |
CEN |
EN 536:1999 |
Road construction machines - Asphalt mixing plants - Safety requirements |
05.11.1999 |
CEN |
EN 547-1:1996 |
Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for the whole body access into machinery |
22.03.1997 |
CEN |
EN 547-2:1996 |
Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
22.03.1997 |
CEN |
EN 547-3:1996 |
Safety of machinery - Human body measurements - Part 3: Anthropometric data |
22.03.1997 |
CEN |
EN 563:1994 |
Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces |
31.12.1994 |
CEN |
EN 563/A1:1999 |
Safety of machinery - Temperatures of touchable surfaces - Ergonomics data to establish temperature limit values for hot surfaces - Amendment 1 |
15.04.2000 |
CEN |
EN 574:1996 |
Safety of machinery - Two-hand control devices - Functional aspects - Principles for design |
22.03.2000 |
CEN |
EN 608:1994 |
Agricultural and forestry machinery - Portable chain saws - Safety |
31.12.1994 |
CEN |
EN 609-1:1999 |
Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters |
11.06.1999 |
CEN |
EN 609-2:1999 |
Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters |
15.04.2000 |
CEN |
EN 614-1:1995 |
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
14.02.1996 |
CEN |
EN 614-2:2000 |
Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks. |
10.03.2001 |
CEN |
EN 617:2001 |
Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers |
14.06.2002 |
CEN |
EN 618:2002 |
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors |
24.06.2003 |
CEN |
EN 619:2002 |
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads. |
14.08.2003 |
CEN |
EN 620:2002 |
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
24.06.2003 |
CEN |
EN 626-1:1994 |
Safety of machinery - Reduction of risks to health from hazardous substances emitted by machinery - Part 1: Principles and specifications for machinery manufacturers |
14.02.1996 |
CEN |
EN 626-2:1996 |
Safety of machinery - Reduction of risk to health from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures |
28.11.1996 |
CEN |
EN 627:1995 |
Specification for data logging and monitoring of lifts, escalators and passenger conveyors |
28.11.1996 |
CEN |
EN 632:1995 |
Agricultural machinery - Combine harvesters and forage harvesters - Safety |
08.08.1996 |
CEN |
EN 690:1994 |
Agricultural machinery - Manure spreaders - Safety. |
01.07.1995 |
CEN |
EN 692:1996 |
Mechanical presses - Safety |
05.02.1998 |
Warning: This publication does not concern presses with full-revolution clutches referred to in standard EN 692, in paragraphs 5.2.3, 5.3.2, 5.4.6 and 5.5.2, tables 2, 3, 4 and 5 and Annexes A and B1, in respect of which it grants no presumption of conformity to the provisions of Directive 98/37/EC. |
CEN |
EN 693:2001 |
Machine tools - Safety - Hydraulic presses. |
27.11.2001 |
CEN |
EN 704:1999 |
Agricultural machinery - Pick-up balers - Safety |
11.06.1999 |
CEN |
EN 706:1996 |
Safety requirements for agricultural and forestry machinery - Vine shoot tipping machines |
22.03.1997 |
CEN |
EN 707:1999 |
Agricultural machinery - Slurry tankers - Safety |
05.11.1999 |
CEN |
EN 708:1996 |
Agricultural machinery - Soil working machines with powered tools - Safety |
08.05.1997 |
CEN |
EN 708/A1:2000 |
Agricultural machinery - Soil working machines with powered tools - Safety - Amendment 1 |
16.06.2000 |
CEN |
EN 709:1997 |
Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety |
23.10.1997 |
CEN |
EN 709/A1:1999 |
Machinery for agriculture and forestry - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety - Amendment 1 |
15.04.2000 |
CEN |
EN 710:1997 |
Safety requirements for foundry moulding and coremaking machinery and plant and associated equipment |
13.03.1998 |
CEN |
EN 741:2000 |
Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials. |
27.11.2001 |
CEN |
EN 745:1999 |
Agricultural machinery - Rotary mowers and flail-mowers - Safety |
11.06.1999 |
CEN |
EN 746-1:1997 |
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
04.06.1997 |
CEN |
EN 746-2:1997 |
Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems |
04.06.1997 |
CEN |
EN 746-3:1997 |
Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases |
04.06.1997 |
CEN |
EN 746-4:2000 |
Industrial thermoprocessing equipment - Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment |
16.06.2000 |
CEN |
EN 746-5:2000 |
Industrial thermoprocessing equipment - Part 5: Particular safety requirements for salt bath thermoprocessing equipment. |
27.11.2001 |
CEN |
EN 746-8:2000 |
Industrial thermoprocessing equipment - Part 8: Particular safety requirements for quenching equipment. |
27.11.2001 |
CEN |
EN 774:1996 |
Garden equipment - Hand held, integrally powered hedge trimmers - Safety |
15.10.1996 |
CEN |
EN 774/A1:1997 |
Garden equipment - Hand held, integrally powered hedge trimmers - Safety - Amendment 1 |
08.05.1997 |
CEN |
EN 774/A2:1997 |
Garden equipment - Hand held, integrally powered hedge trimmers - Safety - Amendment 2 |
23.10.1997 |
CEN |
EN 774/A3:2001 |
Garden equipment - Hand held, integrally powered hedge trimmers - Safety - Amendment 3 |
27.11.2001 |
CEN |
EN 775:1992 |
Manipulating industrial robots - Safety (ISO 10218:1992, modified) |
25.08.1993 |
CEN |
EN 786:1996 |
Garden equipment - Electrically powered walk-behind and lawn edge trimmers - Mechanical safety |
15.10.1996 |
CEN |
EN 786/A1:2001 |
Garden equipment - Electrically powered walk- behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety - Amendment 1 |
27.11.2001 |
CEN |
EN 791:1995 |
Drill rigs - Safety |
08.08.1996 |
CEN |
EN 792-1:2000 |
Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners. |
27.11.2001 |
CEN |
EN 792-2:2000 |
Hand-held non-electric power tools - Safety requirements - Part 2: Cutting- off and crimping power tools. |
27.11.2001 |
CEN |
EN 792-3:2000 |
Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers. |
27.11.2001 |
CEN |
EN 792-4:2000 |
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools. |
27.11.2001 |
CEN |
EN 792-5:2000 |
Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills. |
27.11.2001 |
CEN |
EN 792-6:2000 |
Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners. |
27.11.2001 |
CEN |
EN 792-7:2001 |
Hand-held non-electric power tools - Safety requirements - Part 7: Grinders |
14.06.2002 |
CEN |
EN 792-8:2001 |
Hand-held non-electric power tools - Safety requirements - Part 8: Polishers and sanders |
14.06.2002 |
CEN |
EN 792-9:2001 |
Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders |
14.06.2002 |
